Damage monitoring of adhesively bonded composite-metal hybrid joints using carbon nanotube-based sensing layer
نویسندگان
چکیده
منابع مشابه
Computational Models of Adhesively Bonded Joints
Simulations using the Finite Element Method (FEM) play an increasingly important role in the design process of joints and fasteners in the aerospace industry. In order to utilize the potential of such adhesive bonding, there is an increasing need for effective and accurate computational methods. The geometry and the nature of an adhesive joint are, however, not so simple to describe effectively...
متن کاملAnalytical Solution of Stress Field in Adhesively Bonded Composite Single-Lap Joints Under Mechanical Loadings
In this paper, considering an adhesively bonded composite single-lap joint, a novel approach is presented to predict the peel and shear stress distributions of the adhesive layer for an ASTM standard test sample. In current method, the equilibrium equations are derived using the energy method and based on the Timoshenko’s beam theory. Two solution procedures then are discussed, one of which rep...
متن کاملHybrid Carbon Nanotube-Composite Architectures
Hybrid composite architectures employing traditional advanced composites and carbon nanotubes (CNTs) offer significant potential mechanical and multifunctional performance benefits. Dense patterns of well-aligned carbon nanotubes (CNTs) were grown on silicon wafers using a thermal chemical vapor deposition (CVD) process [1]. Wetting of CNTs and retention of mechanical properties of the fibers a...
متن کاملCovalently bonded carbon nanotube – graphene hybrid material
We have witnessed tremendous growth in the area of nanomaterials for the past three decades. The discovery of fullerenes by Kroto et al. in 1985, was followed by the isolation of some more novel carbon nanomaterials, new allotropes of carbon. These include carbon nanotubes (CNTs) obtained by Iijima in 1991 and graphene isolated by simple exfoliation of graphite with a scotch paper by Novoselov ...
متن کاملDisbond detection in adhesively bonded composite structures using vibration signatures
This paper presents a structural health monitoring technique based on analysis of the dynamic signature of the structure, which changes as damage occurs, due to alterations in structural properties such as stiffness and damping. Experiments performed on plate specimens and T-joint specimens which had various degrees of damage in the form of delaminations showed that it is possible to quantify t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nanocomposites
سال: 2020
ISSN: 2055-0324,2055-0332
DOI: 10.1080/20550324.2019.1699229