Data-Based Predictive Control for Wastewater Treatment Process
نویسندگان
چکیده
منابع مشابه
Predictive Control of a Wastewater Treatment Process
The paper deals with the design of a predictive controller for a wastewater treatment process. In the considered process, the wastewater is treated in order to obtain an effluent having the substrate concentration within the standard limits established by law (below 20 mg/l). This goal is achieved by controlling the concentration of dissolved oxygen to a certain value. The predictive controller...
متن کاملModel Based Predictive Control for Wastewater Applications
The aim of this paper is to demonstrate dissolved oxygen and nitrate control in a wastewater treatment-plant, and an integrated wastewater system, using model predictive control. This control is of importance in maintaining the conditions required for aquatic organisms and so, the entire dynamics must be considered: the urban sewer system, water treatment plant, and river itself. The integrated...
متن کاملDissolved oxygen control of the activated sludge wastewater treatment process using model predictive control
Activated sludge wastewater treatment processes are difficult to be controlled because of their complex and nonlinear behavior, however, he control of the dissolved oxygen level in the reactors plays an important role in the operation of the facility. For this reason a new pproach is studied in this paper using simulated case-study approach: model predictive control (MPC) has been applied to co...
متن کاملFuzzy predictive control for nitrogen removal in biological wastewater treatment.
Whenever the carbon/nitrogen ratio of a domestic wastewater is too low, full denitrification is difficult to obtain and an additional source of organic carbon has to be provided. Since loading conditions may vary appreciably over the diurnal cycle, depending on the weather and sewage conditions, dosing should be controlled by an adaptive regulator to keep into account the time-varying process d...
متن کاملImproved Optimization Process for Nonlinear Model Predictive Control of PMSM
Model-based predictive control (MPC) is one of the most efficient techniques that is widely used in industrial applications. In such controllers, increasing the prediction horizon results in better selection of the optimal control signal sequence. On the other hand, increasing the prediction horizon increase the computational time of the optimization process which make it impossible to be imple...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Access
سال: 2018
ISSN: 2169-3536
DOI: 10.1109/access.2017.2779175