Deactivation of Silica-Alumina Catalyst in <i>p</i>-Xylene Isomerization Reaction
نویسندگان
چکیده
منابع مشابه
Catalyst deactivation
The fundamentals of catalyst deactivation are presented in this review. The chemico-physical aspects concerning the various deactivation causes (i.e. poisoning, sintering, coking, solid-state transformation, masking, etc.) have been analyzed and discussed, along with the mathematical description of the deactivation phenomena. # 1999 Elsevier Science B.V. All rights
متن کاملPreparation of Pt/Al2O3-Cl Catalyst and Investigation of Operating Variables Effects on Isomerization Reaction
A high chlorinated alumina catalyst obtained by treating Pt/γ-Al2O3 (0.25 wt. % Pt) samples with two mixtures of CCl4/N2 and CCl4/N2/H2 was tested for the hydroisomerization of C6 alkane. The conversion of n-hexane feed was diluted with hydrogen performed with different H2/HC ratios at various temperatures, liquid hourly space velocities (LHSVs) and 3MPa total pressure. The catalyst introduced ...
متن کاملReaction and Deactivation Pathways in Xylene Isomerizationon Zirconia Modified by Tungsten Oxide
The effect of H2 on isomerization pathways and on the acid site density on WOx-ZrO2 catalysts was explored using kinetic measurements of acid-catalyzed o-xylene isomerization reactions. Initial o-xylene isomerization rates on WOx-ZrO2 at 523 K are proportional to the H2 concentration even though H atoms are not involved directly in reaction turnovers, as shown by the low deuterium content in th...
متن کاملn-Butane Isomerization Catalyzed by Sulfated Zirconia Nanocrystals Supported on Silica or γ-Alumina
Supported sulfated zirconia catalysts with zirconia contents of 10, 20 and 50 wt% were prepared by impregnation of SiO2 and γ-Al2O3 supports with H2SO4/Zr(SO4)2 solutions followed by calcination at 923 K. The catalysts were characterized by X-ray diffraction, extended X-ray absorption fine structure measurements, thermal analysis, UV–vis spectroscopy, and electron microscopy. Tetragonal zirconi...
متن کاملStudying of Catalyst Deactivation in a Commercial Hydrocracking Process (ISOMAX)
Catalyst deactivation is usually indispensable, although the rate at which it occurs varies greatly. At first, this article discusses the causes of deactivation in a commercial hydrocracking unit called Isomax. Then, a 5-lump kinetic model including catalyst decay function for hydrocracking of vacuum gas oil in a commercial plant is proposed. The model considers vacuum gas oil (VGO) having boil...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of The Japan Petroleum Institute
سال: 1977
ISSN: 0582-4664
DOI: 10.1627/jpi1958.20.491