Dead-End Microfiltration of Rough Nonalcoholic Beer by Different Polymeric Membranes
نویسندگان
چکیده
منابع مشابه
Removal of industrial cutting oil from oil emulsions by polymeric ultra- and microfiltration membranes.
The utilization of micro- and ultrafiltration with polymeric membranes for treatment of industrial cutting oil emulsion was investigated. The performance of 14 different membranes with pore sizes in the range of 1-800 nm, representing 8 different materials and varying hydrophobicity, was determined experimentally. Membrane permeances between 1.6 and 939 L m 2 h(-1) bar(-1) have been observed fo...
متن کاملMicrofiltration process by inorganic membranes for clarification of TongBi liquor.
Membrane separation is an alternative separation technology to the conventional method of filtration. Hence, it has attracted use in the purification and concentration of Chinese Herbal Medicine Extracts (CHMEs). The purpose of this work was to study the process of microfiltration of Tongbi liquor (TBL), a popular Chinese herbal drink, using ceramic membranes. Zirconium oxide and aluminum oxide...
متن کاملInvestigation of purge time in cathodic dead-end mode PEMFC
Recently, special type of fuel cells has been developed that operates in a Dead End mode. Working in this condition, the Dead-End fuel cell is supplied withhydrogen almost at the same rate of consumption. It is noteworthy to mention thatall of the water transport mechanisms have been considered in this simulation.Water accumulation that is directly proportional to the cell current is of a grea...
متن کاملFunctionalized Polymeric Membranes for CO2 Capture
Reducing CO2 emission and lowering the concentration of greenhouse gases in the atmosphere has quickly become one of the most urgent environmental issues. While a variety of technologies and methods have been developed, the separation of CO2 from gas streams is still a critical issue. Apart from establishing new techniques, the exploration of membrane materials with high separation performance ...
متن کاملMorphological characterization of a polymeric microfiltration membrane by synchrotron radiation computed microtomography
Most commercial polymeric membranes are prepared by phase inversion. The performance of the membranes depends greatly on the morphology of the porous structure formed during the different steps of this process. Researchers in this field have found it extremely difficult to foresee how a change in the composition of the polymer solution will affect pore formation without a set of methods designe...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the American Society of Brewing Chemists
سال: 2010
ISSN: 0361-0470,1943-7854
DOI: 10.1094/asbcj-2010-0315-01