Decentralized PID Control by Using GA Optimization Applied to a Quadrotor
نویسندگان
چکیده
منابع مشابه
Event-Based PID Control: Application to a Mini Quadrotor Helicopter
Although periodicity simplifies design and analysis in control theory, it is no more adapted for embedded systems because it results in a conservative usage of resources. Indeed, the control signal is computed and updated at the same rate regardless whether is really required or not. On the other hand, event-driven sampling calls for resources whenever they are indeed necessary. Event-based PID...
متن کاملControl Pid De Altura De Un Quadrotor
This paper contains the development of the identification with the black box method and PID control of the lifting process (on the Y axis) of a Quadrotor model GAUI 330X, The process involves the developing of the speed control loop within control angular speed of the motor and the sensor used was a CNZ1120 with its respective voltage-frequency converter. it is applied nonparametric methods Eye...
متن کاملUsing PSO and GA for Optimization of PID Parameters
Proportional-Integral-Derivate (PID) controllers are widely used in industry because of their remarkable efficiency, simple structure and robust performance for a wide range of applications. Parameters tuning (Kp,Ki,Kd) of PID controller is necessary to satisfy the operation of the system. But many tuning methods such as Ziegler-Nichols methods do not work so perfectly as it is expected. Such m...
متن کاملLQR-PID Control Applied to Hexacopter Flight
In this paper the mathematical model representing the dynamic of a Unmanned Aerial Vehicle (UAV) is studied in order to analyse its behaviour. In order to stabilize the entire system, linear Quadratic Regulator (LQR) control is used in such a way to set both PD and PID controls in position variables. A set simulation is performed to carry out the results for linear and non linear models. The LQ...
متن کاملTuning PID attitude stabilization of a quadrotor using particle swarm optimization (experimental)
Proportional, Integral and Derivative (PID) controllers are the most popular type of controller used in industrial applications because of their notable simplicity and effective implementation. However, manual tuning of these controllers is tedious and often leads to poor performance. The conventional Ziegler-Nichols (Z-N) method of PID tuning was done experimentally enables easy identification...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Automation, Mobile Robotics and Intelligent Systems
سال: 2018
ISSN: 1897-8649,2080-2145
DOI: 10.14313/jamris_2-2018/9