Decorative Wood Fiber/High-Density Polyethylene Composite with Canvas or Polyester Fabric
نویسندگان
چکیده
منابع مشابه
Preparation of Wood Plastic Composite with High Density Polyethylene and Bagasse
Abstrac: In this paper, the mechanical properties of high density polyethylene (HDPE grade 3840) produced by Bandare ImamIran, mixed with the wood and bagasse as fillers with 10-50 % w/w have been studied. The maximum tensile strength was observed at 10% w/w of fillers ratio. The elongation, impact strength and fracture energy were decreased with increasing of fillers ratio while the Young modu...
متن کاملHigh-density Polyethylene-based Composites with Pressure-treated Wood Fibers
High-Density Polyethylene (HDPE)-based composites with alkaline copper quaternary (ACQ)and micronized copper quaternary (MCQ)treated wood fibers were manufactured through injection molding. The mechanical properties, water absorption, and biological resistance properties of the fabricated composites with different coupling treatments were investigated. Composites with ACQand MCQ-treated wood ha...
متن کاملA novel wood flour-filled composite based on microfibrillar high-density polyethylene (HDPE)/Nylon-6 blends.
A novel wood flour (WF)-filled composite based on the microfibrillar high-density polyethylene (HDPE) and Nylon-6 co-blend, in which both in situ formed Nylon-6 microfibrils and WF acted as reinforcing elements, was successfully developed using a two-step extrusion method. At the 30wt.% WF loading level, WF-filled composite based on the microfibrillized HDPE/Nylon-6 blend exhibited higher stren...
متن کاملCompression Properties of Polyester Needlepunched Fabric
In the present paper, a study of the effects of fabric weight, fiber cross-sectional shapes (round, hollow and trilobal) and presence of reinforcing material on the compression properties (initial thickness, percentage compression, percentage thickness loss and percentage compression resilience) of polyester needle punched industrial nonwoven fabrics is presented. It was found that for fabrics ...
متن کاملSericin based bioactive coating for polyester fabric
In this study, a process has been developed for durable coating of sericin on polyester. Pre modification of polyester with alkali (sodium hydroxide) has been carried out to incorporate polar entities on its inert surface. 10g/L of sericin with 30mL/L of glutaraldehyde, cured at 130°C for 2min has been optimized for its application on modified surface. Treated samples are tested for surface smo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Renewable Materials
سال: 2020
ISSN: 2164-6341
DOI: 10.32604/jrm.2020.010728