Deflection prediction of a cantilever beam subjected to static co-planar loading by analytical methods

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Large Deflection Static Analysis of a Cantilever Beam Subjected to a Point Load

This work presents geometrically non-linear static analysis of a cantilever beam subjected to a non-follower transversal point load at the free end of the beam. The material of the beam is assumed as isotropic and hyperelastic. In this study, finite element model of the beam is constructed by using total Lagrangian finite element model of two dimensional continua for a twelve-node quadratic ele...

متن کامل

Static Deflection of Hinged-Hinged piezoelectric Multilayer Beam Under Different Loading Conditions

In this paper at first introduced constituent equations for piezoelectric and then by the help of this equations, internal energy of hinged-hinged piezoelectric multilayer beam was computed. Then by the principle of minimum potential energy and Rayleigh -Ritz method the bending curvature equation of hinged-hinged piezoelectric multilayer beam under concentrated moment, concentrated force, unifo...

متن کامل

Crack Influences on the Static and Dynamic Characteristic of a Micro-Beam Subjected to Electro Statically Loading

In the present work the pull-in voltage of a micro cracked cantilever beam subjected to nonlinear electrostatic pressure was studied. Two mathematical models were employed for modeling the problem: a lumped mass model and a classical beam model. The effect of crack in the lumped mass model is the reduction of the effective stiffness of the beam and in the beam model; the crack is modeled as a m...

متن کامل

Numerical Simulation of Output Response of PVDF Sensor Attached on a Cantilever Beam Subjected to Impact Loading

Polyvinylidene Flouride (PVDF) is a film-type polymer that has been used as sensors and actuators in various applications due to its mechanical toughness, flexibility, and low density. A PVDF sensor typically covers an area of the host structure over which mechanical stress/strain is averaged and converted to electrical energy. This study investigates the fundamental "stress-averaging" mechanis...

متن کامل

An Elasticity Solution for Static Analysis of Functionally Graded Curved Beam Subjected to a Shear Force

In this paper, using 2-D theory of elasticity, a closed-form solution is presented for stressdistributions and displacements of a FG curved beam under shear force at its free end. The materialproperties are assumed to vary continuously through the radial direction based on a simple power lawmodel and Poisson’s ratio is supposed to be constant. In order to verify the solution, it is shown that a...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: HBRC Journal

سال: 2014

ISSN: 1687-4048,1687-4048

DOI: 10.1016/j.hbrcj.2013.11.003