Deformation and damage characteristics of ball bearings under blast loading
نویسندگان
چکیده
This paper presents the unique failure characteristics, such as fragmentation, internal cracks, general deformation and pitting, observed on a SS420C ball bearing from direct blast loading using cylindrical PE-4 explosive. Axisymmetric simulations were performed to gain insights of mechanisms. While additional work is needed fully understand all characteristic found, valuable findings have been presented explain some failures.
منابع مشابه
Deformation mechanisms and damage in -alumina under hypervelocity impact loading
impact loading Cheng Zhang, Rajiv K. Kalia, Aiichiro Nakano, Priya Vashishta, and Paulo S. Branicio Collaboratory for Advanced Computing and Simulations, Department of Chemical Engineering and Materials Science, Department of Physics and Astronomy, and Department of Computer Science, University of Southern California, Los Angeles, California 90089-0242, USA Departmento de Física, Universidade F...
متن کاملNumerical Investigation of Circular Plates Deformation under Air Blast Wave
In the current research the maximum deflection of circular plates made of AA5010 and AA1100 alloys under blast load was investigated. Shock waves were produced by exploding a spherical charge in different distances from the center of plates. The ABAQUS software uses conwep equation for blast loading analysis. It was found the results of these simulations have about 30% to 40% inaccuracy in comp...
متن کاملPlastic Deformation Characteristics of Continuous Confined Strip Shearing Process Considering the Deformation Homogeneity and Damage Accumulation
In the present investigation, two dimensional elastoplastic finite element analysis was conducted to assess the deformation characteristics of Al 1100 alloy during continuous confined strip shearing (C2S2) process. The results of simulations showed that the plastic strain distribution across the deformed sample is non-uniform irrespective of the amount of friction and C2S2 die angle. The most u...
متن کاملThermohydrodynamic Characteristics of Journal Bearings Running under Turbulent Condition
A thermohydrodynamic (THD) analysis of turbulent flow in journal bearings is presented based on the computational fluid dynamic (CFD) techniques. The bearing has infinite length and operates under incompressible and steady conditions. In this analysis, the numerical solution of Navier-Stokes equations with the equations governing the kinetic energy of turbulence and the dissipation rate, couple...
متن کاملFinite Element Analysis for CFST Columns under Blast Loading
The columns of frame structures are the key load-bearing components and the exterior columns are susceptible to attack in terrorist blasts. When subjected to blast loads, the columns would suffer a loss of bearing capacity to a certain extent due to the damage imparted which may lead to their collapse and even cause the progressive collapse of the whole structure . The concrete-filled steel col...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Epj Web of Conferences
سال: 2021
ISSN: ['2101-6275', '2100-014X']
DOI: https://doi.org/10.1051/epjconf/202125005008