Deformation and energy absorption of aluminum square tubes with dynamic axial compressive load.
نویسندگان
چکیده
منابع مشابه
Experimental and numerical crashworthiness investigation of hybrid composite aluminum tubes under dynamic axial and oblique loadings
This research deals with axial and oblique impact crash tests on simple and hybrid composite tubes. Axial and oblique impact tests have been generated on simple and hybrid composite tubes with one, two and three layers. A drop test rig was used to conduct the experiments. Furthermore, in order to gain more detailed knowledge about the crash process, finite element simulations of the experim...
متن کاملexperimental and numerical crashworthiness investigation of hybrid composite aluminum tubes under dynamic axial and oblique loadings
this research deals with axial and oblique impact crash tests on simple and hybrid composite tubes. axial and oblique impact tests have been generated on simple and hybrid composite tubes with one, two and three layers. a drop test rig was used to conduct the experiments. furthermore, in order to gain more detailed knowledge about the crash process, finite element simulations of the experiments...
متن کاملEnergy Absorption Analysis and Multi-objective Optimization of Tri-layer Cups Subjected to Quasi-static Axial Compressive Loading
In this paper, the energy absorption features of tri-layer explosive-welded deep-drawn cups subjected to quasi-static axial compressive loading are investigated numerically and experimentally. To produce the cups, tri-layer blanks composed of aluminum and stainless steel alloys were fabricated by an explosive-welding process and formed by a deep drawing setup. The quasi-static tests were carrie...
متن کاملUltimate Load Capacity and Behavior of Thin-Walled Curved-Steel Square Struts, Subjected to Compressive Load
There have been some experimental tests on hollow curved-steel struts with thin-walled square sections, in order to investigate their general behavior, particularly their capacity for bearing differing loads. One set of square tubes are cold-formed into segments of circular arcs with curvature radii, equal to 4000 mm. Different lengths of curved struts are fabricated so as to cover a practical ...
متن کاملThe Effect of Fe Additive on Plastic Deformation for Crush-Boxes with Closed-Cell Metal Foams, Part II: Al-Composite Foam-Filled brass tubes Compression Response
The brass tubes with foam cores of AlSi7SiC3, AlSi7SiC3Fe1 and AlSi7SiC3Fe3 were produced as the crush-boxes with circle and square cross-section. Then axial compressive behavior and energy absorption capability of the foam-filled tubes were investigated during the quasi-static progressive plastic buckling. The uniaxial compressive stress–strain curves of the foam-filled brass tubes exhibited t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Light Metals
سال: 2002
ISSN: 0451-5994,1880-8018
DOI: 10.2464/jilm.52.308