Deformation and Texture Evolution of a 3004 Aluminium Alloy During Ironing
نویسندگان
چکیده
منابع مشابه
Microstructure and micro-texture evolution during large strain deformation of Inconel alloy IN718
Article history: Received 2 January 2015 Received in revised form 22 October 2015 Accepted 23 October 2015 Available online 27 October 2015 The hot deformation behaviour of Inconel alloy IN718 was studied in the temperature range of 950–1100 °C and at strain rates of 0.01 and 1 s with a view to understand the microstructural evolution as a function of strain rate and temperature. For this purpo...
متن کاملThe effect of twinning on texture evolution during ECAP processing of an AM30 magnesium alloy
An AM30 magnesium alloy was processed through ECAP method at 200 °C. Optical and transmission electron microscopy as well as electron back scattered diffraction (EBSD) technique were employed to characterize the deformed microstructure. A partially recrystallized microstructure including ultrafine/nano structures was obtained. The area fraction of 49% was measured for the recrystallized regions...
متن کاملInternal strain and texture evolution during deformation twinning in magnesium
The development of a twinned microstructure in hexagonal close-packed rolled magnesium compressed in the in-plane direction has been monitored in situ with neutron diffraction. The continuous conversion of the parent to daughter microstructure is tracked through the variation of diffraction peak intensities corresponding to each. Approximately 80% of the parent microstructure twins by 8% compre...
متن کاملMicrostructure and micro-texture evolution during large strain deformation of an aluminium–copper–lithium alloy AA 2195
Article history: Received 12 July 2014 Accepted 11 September 2014 Available online 20 September 2014 A single hit, hot isothermal plane strain compression (PSC) test was used to understand the microstructural evolution during large strain deformation of aluminium–copper–lithium alloy AA 2195. Hot isothermal PSC tests were conducted in the temperature range of 300–450 C and at strain rates of 0....
متن کاملEvolution of texture in an ultrafine and nano grained magnesium alloy
The evolution of texture was discussed during the formation of ultra-fine and nano grains in a magnesium alloy severely deformed through accumulative back extrusion (ABE). The microstructure and texture obtained after applying multiple deformation passes at temperatures of 100 and 250°C were characterized. The results showed that after single ABE pass at 100°C an ultrafine/nano grained microstr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Textures and Microstructures
سال: 1995
ISSN: 0730-3300,1029-4961
DOI: 10.1155/tsm.25.1