Deformation-Induced Martensitic Transformation in Type 304 Stainless Steel during Cold Upsetting
نویسندگان
چکیده
منابع مشابه
Analysis of deformation induced martensitic transformation in stainless steels
Many studies monitoring the formation of martensite during the tensile deformation of austenite report data which are, in principle, affected by both the applied stress and the resulting plastic strain. It is not clear in these circumstances whether the transformation is stress induced (i.e. the stress provides a mechanical driving force) or whether the generation of defects during deformation ...
متن کاملStrain-Induced Martensite Transformation Simulations during Cold Rolling of AISI 301 Austenitic Stainless Steel
Austenite is a semi-stable phase in most stainless steels that deforms to martensite under Md30 and forms martensitetype ά and ε due to the deformation in the steels. Since the distribution of strain induced martensite plays animportant role in achieving desired properties, the main objective of the present work is to model martensitedistribution of ά during cold rolling using...
متن کاملCompressibility of 304 Stainless Steel Powder Metallurgy Materials Reinforced with 304 Short Stainless Steel Fibers
Powder metallurgy (P/M) technique is usually used for manufacturing porous metal materials. However, some P/M materials are limitedly used in engineering for their performance deficiency. A novel 304 stainless steel P/M material was produced by a solid-state sintering of 304 stainless steel powders and 304 short stainless steel fibers, which were alternately laid in layers according to mass rat...
متن کاملRadiation-induced Segregation and Void Swelling in 304 Stainless Steel
. Void swelling and radiation-induced segregation have been measured in 304 stainless steel. Samples were irradiated in the outer regions of the EBR-11reactor where displacement rates of 2.OX10-8and 6.6 xl 0-8dpds are comparable to those in pressurized water reactor components. Samples were inadiated at temperatures from 371-390°C to total doses of up to 20 dpa. Void swelling reached a maximum ...
متن کاملstrain-induced martensite transformation simulations during cold rolling of aisi 301 austenitic stainless steel
austenite is a semi-stable phase in most stainless steels that deforms to martensite under md30 and forms martensitetype ά and ε due to the deformation in the steels. since the distribution of strain induced martensite plays animportant role in achieving desired properties, the main objective of the present work is to model martensitedistribution of ά during cold rolling using finite element me...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1990
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.76.3_462