Deformation Microstructure and Texture in a Cold-Rolled Austenitic Steel with Low Stacking-Fault Energy
نویسندگان
چکیده
منابع مشابه
Deformation Microstructure and Texture in a Cold-Rolled Austenitic Steel with Low Stacking-Fault Energy
Deformation microstructure and texture in a cold-rolled austenitic steel 310S with low stacking fault energy (SFE) have been investigated by SEM and TEM. When 310S plates were rolled by 95% in thickness reduction, a remarkable development of the brass-type preferred orientation was confirmed by X-ray diffraction. SEM observations of the specimens with such texture exhibited a layered structure ...
متن کاملWork-Hardening and Deformation Mechanism of Cold Rolled Low Carbon Steel
The study reports the mechanical property and microstructure of cold rolled low carbon steel and its work-hardening behavior in the deformation process. The tensile test in room temperature of low carbon steel was implemented for the different cold rolling deformation, the stress-strain curve was draught according to the relationship between strength and deformation and fitted for the polynomia...
متن کاملAn investigation on full annealing temperature and annealing twins’ Density in Fe-33Mn-3Si-2Al high-manganese steel
Twinning induced plasticity (TWIP) steels with high manganese percentage (17-35%), are mostly used in automotive bodies. Their microstructure at room temperature is austenitic, and due to the low stacking fault energy, major deformation mechanism in them is twinning inside austenite grains which leads to enhanced mechanical strength in the steel. Due to the important effect of heat treatment pr...
متن کاملMicrostructure and Mechanical Properties of Cold Rolled AISI 304L and 316L Austenitic Stainless Steels during Reversion Annealing
Microstructural evolutions during annealing of cold rolled AISI 304L and AISI 316L stainless steels were studied. Cold rolled AISI 304L alloy was fully martensitic but cold rolled AISI 316L alloy was partially martensitic due to the higher stability of the austenite phase in the latter. During continuous heating to elevated temperatures, the complete reversion of strain-induced martensite at 75...
متن کاملEvolution of Texture and Dislocation Distributions in High-ductile Austenitic Steel during Deformation
Fe-Mn-C austenitic steels exhibit outstanding high-ductile deformation in their plastic regions along with significant microstructural evolution. In this study, to characterize the microstructural evolution during deformation of these steels, line-profile and texture analyses were carried out using X-ray diffraction. The convolutional multiple whole profile fitting procedure was used for a line...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2010
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.mg200901