Deformation Properties of Tailor Welded Blank Made of Dual Phase Steels
نویسندگان
چکیده
منابع مشابه
Optimum Tailor-welded Blank Design Using Deformation Path Length of Boundary Nodes
In this paper, the optimum shape of Tailor-Welded Blanks (TWB) is investigated. The optimization is performed for two different case studies. The first example is deep drawing of a TWB with dissimilar materials and uniform thicknesses and the next example is deep drawing of a TWB with similar materials and non-uniform thicknesses. The effect of blank optimization on the weld line movement is...
متن کاملA Novel Approach for Formability Prediction of Tailor Welded Blank
Formability of Tailor Welded Blank (TWB) is an important parameter which limits this kind of blanks usage. A forming criterion for tailor welded blank is presented based on the analytical model in this research. This criterion suggests Limit Strength Ratio (LSR) and Limit Thickness Ratio (LTR) for forming limit of TWB. When thickness ratio or strength ratio in tailor welded blank is greater tha...
متن کاملoptimum tailor-welded blank design using deformation path length of boundary nodes
in this paper, the optimum shape of tailor-welded blanks (twb) is investigated. the optimization is performed for two different case studies. the first example is deep drawing of a twb with dissimilar materials and uniform thicknesses and the next example is deep drawing of a twb with similar materials and non-uniform thicknesses. the effect of blank optimization on the weld line movement is in...
متن کاملHigh Temperature Behavior of Dual Phase Steels
Dual phase steels with different martensite volume fraction and morphology were tensile tested at a temperature range of 25 to 5500C. Stress-strain curves of all steels showed serration flow at temperatures of 250 and 3500C, and smooth flow at the other temperatures. Both yield and ultimate tensile strengths increased with increasing testing temperature up to about 450<sup...
متن کاملDamage Behavior in Modern Automotive High Strength Dual Phase Steels During Uniaxial Tensile Deformation
In the present research, damage mechanisms during room temperature uniaxial tensile testing of two different modern high strength dual phase steels,DP780 and DP980, were studied. Detailed microstructural characterization of the strained and sectioned samples was performed by scanning electron microscopy (SEM). The results revealed that interface decohesion, especially at the triple junctions of...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Mechanica et Automatica
سال: 2016
ISSN: 2300-5319
DOI: 10.1515/ama-2016-0007