Degradation Issues in Solid Oxide Cells During High Temperature Electrolysis
نویسندگان
چکیده
منابع مشابه
Electrolyte Degradation in Anode Supported Microtubular YSZ-based Solid Oxide Steam Electrolysis Cells at high voltages of operation
Degradation of solid oxide electrolysis cells (SOECs) is probably the biggest concern in the field of high temperature steam electrolysis (HTSE). Anode supported, YSZ-based microtubular solid oxide fuel cells (SOFC) have been tested in fuel cell mode and also at high voltages (up to 2.8V) under electrolysis mode. At high steam conversion rates the cell voltage tends to saturate. Our hypothesis ...
متن کاملMechanistic studies of water electrolysis and hydrogen electro-oxidation on high temperature ceria-based solid oxide electrochemical cells.
Through the use of ambient pressure X-ray photoelectron spectroscopy (APXPS) and a single-sided solid oxide electrochemical cell (SOC), we have studied the mechanism of electrocatalytic splitting of water (H2O + 2e(-) → H2 + O(2-)) and electro-oxidation of hydrogen (H2 + O(2-) → H2O + 2e(-)) at ∼700 °C in 0.5 Torr of H2/H2O on ceria (CeO2-x) electrodes. The experiments reveal a transient build-...
متن کاملSteam Electrolysis Using a Microtubular Solid Oxide Fuel Cell
Reversible operation of a microtubular solid oxide fuel cell SOFC with high electrochemical efficiency is reported. These devices can ideally produce hydrogen from electricity and steam solid oxide electrolyser SOE and then use the stored hydrogen to generate electricity and heat SOFC , acting as a storage device for the electrical energy. A fuel-electrode-supported Ni–yttriastabilized zirconia...
متن کاملLa0.6Sr0.4Co0.2Fe0.8O3 perovskite cathode for Intermediate Temperature Solid Oxide Fuel Cells: A comparative study
In this study the characteristics of two different kinds of La0.6Sr0.4Co0.2Fe0.8O3 (LSCF) powders, one in-house synthesized powder by a co-precipitation method and another one purchased from Fuel Cell Materials Co. (FCM Co., USA), were compared. The co-precipitated powder was prepared by using ammonium carbonate as precipitant with a NH4+/NO3- molar ratio of 2 and calcination at 1000C for 1 h....
متن کاملStrategies for Lowering Solid Oxide Fuel Cells Operating Temperature
Lowering the operating temperature of solid oxide fuel cells (SOFCs) to the intermediate range (500–700 oC) has become one of the main SOFC research goals. High operating temperatures put numerous requirements on materials selection and on secondary units, limiting the commercial development of SOFCs. The present review first focuses on the main effects of reducing the operating temperature in ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Fuel Cell Science and Technology
سال: 2011
ISSN: 1550-624X,1551-6989
DOI: 10.1115/1.4003787