Degradation studies of crosslinked polyethylene. II Aged in water

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Dielectric Study at Microwave Frequencies of Water-treed Crosslinked Polyethylene

The dielectric properties of water-treed crosslinked polyethylene (XLPE) were studied by using a hollow microwave waveguide system between 135 MHz and 13.6 GH5. The dielectric loss of water-treed XLPE is proportional to water content. Water-treed XLPE has a low relaxation frequency which is probably due to bound water. The binding of water in trees was confirmed by the lower apparent water diff...

متن کامل

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

Wear of highly crosslinked polyethylene acetabular components

BACKGROUND AND PURPOSE Wear rates of highly crosslinked polyethylene (XLPE) acetabular components have varied considerably between different published studies. This variation is in part due to the different techniques used to measure wear and to the errors inherent in measuring the relatively low amounts of wear in XLPE bearings. We undertook a scoping review of studies that have examined the i...

متن کامل

A ruthenium catalyst yielding crosslinked polyethylene.

A ruthenium phosphane aryl sulfonate was found to be an efficient catalyst for the polymerization of ethene. Surprisingly, the resulting polyethylene is crosslinked.

متن کامل

Properties of crosslinked ultra-high-molecular-weight polyethylene.

Substantially reducing the rate of generation of wear particles at the surfaces of ultra-high-molecular-weight polyethylene (UHMWPE) orthopedic implant bearing components, in vivo, is widely regarded as one of the most formidable challenges in modern arthroplasty. In the light of this, much research attention has been paid to the myriad of endogenous and exogenous factors that have been postula...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Plastics, Rubber and Composites

سال: 2005

ISSN: 1465-8011,1743-2898

DOI: 10.1179/174328905x55623