Dehydration-Induced Loss of Corrosion Protection Properties in Chromate Conversion Coatings on Aluminum Alloy 2024-T3

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Galvanic Corrosion Approach to Investigating Chromate Effects on Aluminum Alloy 2024-T3

The effects of chromate treatment on the corrosion of an aluminum/copper aircraft alloy were examined with a galvanic corrosion apparatus composed of two electrodes and a zero resistance ammeter. Combinations of pure Al, pure Cu, and AA2024-T3 electrodes were immersed in 0.1 M NaCl solution, which was saturated with air, O2 , or argon. Selection of electrode material or differential aeration re...

متن کامل

Anti-corrosive Properties of CeO2 Conversion Coatings on Aluminum Alloy 2024 Prepared by Dip Immersion Method

As an alternative to chromate conversion coatings, rare-earth coatings especially cerium, because of the low toxicity, have attracted considerable attention. Using dip immersion method, cerium-based conversion coating was deposited on aluminum 2024. Corrosion resistance was studied in 3.5 wt.% NaCl solution using potentiodynamic polarization, electrochemical impedance spectroscopy, and surface ...

متن کامل

anti-corrosive properties of ceo2 conversion coatings on aluminum alloy 2024 prepared by dip immersion method

as an alternative to chromate conversion coatings, rare-earth coatings especially cerium, because of the low toxicity, have attracted considerable attention. using dip immersion method, cerium-based conversion coating was deposited on aluminum 2024. corrosion resistance was studied in 3.5 wt.% nacl solution using potentiodynamic polarization, electrochemical impedance spectroscopy, and surface ...

متن کامل

corrosion of chromate conversion coatings on aluminum alloys in electrical and electronic equipment

chromate conversion coating is applied on aluminum 6061. the optimum conditions for chromate bath composition and immersion time are also obtained for standard requirements provision such as corrosion resistance in salt spray test, electrical resistance and coating quality. the applied coatings are electrochemically tested in sea and distilled water. according to tafel and cyclic polarization c...

متن کامل

CORROSION RESISTANT SOL–GEL COATING ON 2024-T3 ALUMINUM

The inherent reactivity of the Al–Cu alloys is such that their use for structural, marine, and aerospace components and structures would not be possible without prior application of a corrosion resistance system. Historically these corrosion resistance coatings were based on the use of chemicals containing Cr (VI) compounds. Silane coatings are of increasing interest in industry due to th...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of The Electrochemical Society

سال: 2003

ISSN: 0013-4651

DOI: 10.1149/1.1593040