Delamination Analysis of Polymeric Materials During the Drilling Process
نویسندگان
چکیده
منابع مشابه
consequence analysis of the leakage, ignition and explosion during high pressure sour gas injection process to the oil reservoir
there is no doubt that human being needs to become integrated with industry and industry needs to be progressed, daily. on the other hand, serious events in industrial units specially in oil industries has been shown that such damages and events are industry related ones. the consequence of such events and damages which resulted in chemical and poisoned explosions and loss of life and property ...
Delamination analysis after carbon/epoxy plate drilling
The use of laminate composites in structures is under a considerable increase. The advantages of their use are related with a considerable weight reduction and consequent improvement of dynamic characteristics, in the case of aeronautics, automobile, railway and naval industries. Drilling is a widely used technique as it is always needed to assemble components in more complex structures. Drilli...
متن کاملComprehensive analysis of delamination in drilling of composite materials with various drill bits
Beside the twist drill, the effects of various drill geometries were rarely discussed in analytical fashion. This study presents a comprehensive analysis of delamination in use of various drill types, such as saw drill, candle stick drill, core drill and step drill. In this analysis, the critical thrust force at the onset of delamination is predicted and compared with the twist drill. © 2003 El...
متن کاملDelamination Analysis in Drilling of Composite Materials Using Digital Image Processing, Regression Modeling and Fuzzy Logic
Glass Fiber Reinforced Plastic composites have an increased application in recent days, due to its enhanced structural, mechanical and thermal properties. The heterogeneous nature of this kind of materials makes complications during machining operations. Drilling of holes in GFRP becomes almost unavoidable in fabrication. However, drilling is a common machining practice for assembly of componen...
متن کاملThe effect of chisel length and associated pilot hole on delamination when drilling composite materials
Drilling-induced delamination often occurs both at the entrance and the exit of the workpiece during drilling of composite material. Investigators have studied analytically and experimentally that delamination in drilling can be correlated to the thrust force of the drill. With a pre-drilled pilot hole, the delamination can be reduced significantly. Early reference reported models of drilling-i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2015
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2015.12.518