DEM modeling of fine powder convection in a continuous vibrating bed reactor

Two Phase Modeling of Char Combustion in a Circulating Fluidized Bed Reactor Using ASPEN PLUS

In this paper, combustion of char in the riser of circulating fluidized bed was modeled using ASPEN PLUS. Since physical and chemical phenomena are involved in the process, the model integrates the two-phase hydrodynamic sub-model with the reaction sub-model derived from the literature. In the proposed model, the fluidized bed is divided into several sections and the behavior of each section wa...

Investigating the Batch and Continuous Transesterification of Linseed Oil by Using a Alkaline Heterogeneous Catalyst in a Packed Bed Reactor

Both the continuous and batch transesterification of linseed oil were examined in order to maximize the fatty acid methyl esters (FAME) yield. The continuous process was conducted in a packed bed reactor using calcium oxide as a heterogeneous catalyst. In addition, the impact of two variables, namely the molar ratio of methanol to oil and the flow rate (ml/min), on the FAME yield were stu...

Unsteady-State Modeling of the Fluidized Bed Polyethylene Reactor

Control of a Fluidized Bed Polyethylene Reactor

In present paper, dynamic behavior and control of a fluidized bed reactor for polyethylene production has been considered. A double active sites model for Ziegler-Natta catalysts is used for simulation of polymerization reaction. Hydrodynamic behavior of the bed is modeled using a two phase model including bubble and emulsion phases in which bubble phase has plug flow pattern with different...

Automation of a fixed-bed continuous–flow reactor

This paper describes the design and operation of a laboratory plant with a fixed-bed continuous-flow reactor, fully automated and controlled from a personal computer. The automated variables include two gas flows, one liquid flow, six temperatures, two pressures, one circulation of a cooling liquid, and 10 electrovalves. An adaptive-predictive control system was used. The chemical process chose...