Densification Process of Sepiolite under Hydrothermal Hot-pressing.
نویسندگان
چکیده
منابع مشابه
Hot-pressing process modeling for medium density fiberboard (MDF)
In this paper we present a numerical solution for the mathematical modeling of the hot-pressing process applied to medium density fiberboard. The model is based in the work of Humphrey [1982], Humphrey and Bolton [1989] and Carvalho and Costa [1998], with some modifications and extensions in order to take into account mainly the convective effects on the phase change term and also a conservativ...
متن کاملEffect of chelating agent on Hydroxyapatite morphology under hydrothermal process
Citrate was used as chelating or morphology regulating agent in this study. In the presence of regulating agent a two-dimensional monetite phase evolved into three-dimentional hydroxyapatite microspheres with an average diameter of 4 µm. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) studies revealed the importance of Ca/citrate ratio in regulating the particle m...
متن کاملZirconium Carbide Produced by Spark Plasma Sintering and Hot Pressing: Densification Kinetics, Grain Growth, and Thermal Properties
Spark plasma sintering (SPS) has been employed to consolidate a micron-sized zirconium carbide (ZrC) powder. ZrC pellets with a variety of relative densities are obtained under different processing parameters. The densification kinetics of ZrC powders subjected to conventional hot pressing and SPS are comparatively studied by applying similar heating and loading profiles. Due to the lack of ele...
متن کاملNeural Observer for the Hot Isostatic Pressing
Hot Isostatic Pressing (HIP'ing) is one of several processes used for consolidating porous materials (such as metal powders) to high density. The equations describing the HIP'ing system dynamics are immensely complicated and highly nonlinear, thus complicating any controller design for the system. Further complications arise due to the fact that one of the system's states, grain size, cannot be...
متن کاملPre-pressing and Pre-heating via Hot-Air/Hot-Steam Process for the Production of Binderless Medium- Density Fiberboards
The hot-air/hot-steam process was used for the first time as a combined pre-pressing and pre-heating system for the production of medium-density fiberboards (MDF) at the pilot scale. Pre-heating systems are designed to pre-heat fiber mats before pressing by hot-presses. Using such techniques, pressing times are reduced significantly and the board properties are influenced positively; both are e...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 1993
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.40.355