Density, Viscosity and Surface Tension of Molten Aluminum Chloride

Shear viscosity of molten sodium chloride

Density of Molten Terbium Chloride

Anhydrous (99.99%) TbCl3 was obtained from Aldrich (Milwaukee, WI, USA) and used without further purifications. It was handled in an argon-filled dry box with a water content < 2 ppm and an oxygen content < 1 ppm. A 166Ho radiation source (2.27 MBq) was used because of its desirable decay characteristics (t1/2 = 1200y, up to 8 photons per disintegration, more than 10% branching ratio). A multi-...

Density, Viscosity and Surface Tension of Whey Protein Concentrate Solutions

We have determined the density, rheological behavior and surface tension of whey protein concentrate (WPC) solutions. Densities (r) were measured at concentrations of 0.05–0.40 w/w at temperatures of 20–35C. The results were expressed as a function of temperature and mass fraction (w). This function fit the data with deviations of less than 0.4%. Apparent viscosities (ha) for WPC solutions with...

Density and Temperature Dependencies of Liquid Surface Tension

In this paper the density and temperature dependencies of surface tension are investigated. Using the Lennard-Jones (12,6), as an effective pair interaction potential, a linear expression is derived for isotherms of g /r2  versus r2 for some normal and ChloroFluoroCarbons (CFCs)</...

Surface Tension during Molten Metal Granulation

The surface tensions of a number of common commercial ferroalloys have been measured during their granulation in water. These measured values are significantly lower than would be expected from a normal metal-gas interface and are more typical of the interfacial tensions of slag-gas interfaces. This would seem to indicate that the slag-metal interface on the surface of a granule produces no sig...