Deoxidation Characteristics and Morphology of Deoxidation Products in Molten Iron with Ti and Ti-Si, Ti-Mn, and Ti-Si-Mn Complex Deoxidizers
نویسندگان
چکیده
منابع مشابه
Photoelectrochemical Water Splitting Properties of Ti-Ni-Si-O Nanostructures on Ti-Ni-Si Alloy
Ti-Ni-Si-O nanostructures were successfully prepared on Ti-1Ni-5Si alloy foils via electrochemical anodization in ethylene glycol/glycerol solutions containing a small amount of water. The Ti-Ni-Si-O nanostructures were characterized by field-emission scanning electron microscopy (FE-SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), and diffuse reflectance absorption spectra....
متن کاملTRIBOLOGICAL PROPERTIES OF Ti-Si-Zr ALLOYS
Nowadays titanium alloys are extensively used for aerospace and biomedical applications. However, despite good mechanical properties and excellent corrosion resistance they possess poor wear resistance and a tendency to galling and seizure. In this study the tribological properties of experimental Ti-Si-Zr based alloys were studied using a standard ball-on-disc wear testing system. The wear and...
متن کاملMagnetic hardening of Zr2Co11:(Ti, Si) nanomaterials
The role of Ti and Si additions in the magnetic hardening of rapidly quenched Zr2Co11-based nanomaterials has been investigated. Nanocrystalline Zr17–xTixCo83 and Zr18Co82–ySiy are mainly composed of rhombohedral Zr2Co11 and a small amount of orthorhombic Zr2Co11, hcp Co, and cubic Zr6Co23. Ti addition decreases the mean grain size of the magnetic phases, and thus increases coercivity and energ...
متن کاملMultifunctional nanostructured Ti-Si-C thin films
In this Thesis, I have investigated multifunctional nanostructured Ti-Si-C thin films synthesized by magnetron sputtering in the substrate-temperature range from room temperature to 900 °C. The studies cover high-temperature growth of Ti3SiC2 and Ti4SiC3, low-temperature growth of Ti-Si-C nanocomposites, and Ti-Si-C-based multilayers, as well as their electrical, mechanical, and thermal-stabili...
متن کاملCorrosion Characteristics of a - Ti and Ti 2 Cu Composing Ti - Cu Alloys
A series ef binary Ti-Cu alloys containing 5-20 mass% Cu was prepared, and the corresien behavior of a-Ti and Ti2Cu composing the Ti-Cu alloys were examined based on the anodic polarization curves and released iens in O.9% NaCl and 1% lactic acid solutions. In both selutions, the Ti-Cu alloys showed the same anodic polarization curves as titanium in the conditien below 1.4 V. Hewever, precipita...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1983
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.69.8_944