Dephosphorization reaction of low carbon iron melt with Na2CO3.
نویسندگان
چکیده
منابع مشابه
Synthesis of calcium carbide-derived carbon by mechanochemical reaction of calcium carbide with sulfur, iron sulfide and zinc oxide
In the present work, we report a novel design and preparation for the mechanochemical synthesis of calcium carbide-derived carbon (CaC2-CDC) at ambient temperature. Thermodynamic calculations confirmed the possibility of calcium carbide-derived carbon formation by the reaction of calcium carbide with sulfur, iron sulfide and zinc oxide at ambient temperature. The CDCs were synthesized by the ba...
متن کاملReaction Behavior of Phosphorus in Coal-Based Reduction of an Oolitic Hematite Ore and Pre-Dephosphorization of Reduced Iron
Coal-based reduction followed by magnetic separation is an effective way to recover iron from high phosphorus-containing oolitic hematite ore. Given that high quantities of dephosphorization agent are needed to obtain low phosphorus reduced iron, a novel approach is proposed by the authors. Without prior phosphorus removal, the phosphorus was enriched in the reduced iron during a reduction proc...
متن کاملGrafting of Acrylamide to Low Density Polyethylene During Melt Processing
Acrylamide was grafted in low density polyethylene during melt processing in the presence of a free radical initiator using a torque rheometer in a closed system. Effects of processing time, acrylamide and benzoyl peroxide concentrations were studied. FTIR studies revealed that the degree of grafting increased by an increase in acrylamide concentration. Maximum grafting was obtained at 7 mi...
متن کاملProducing low fluorine mold powder by replacing CaF2 with Na2CO3, ZnO and Fe2O3
Mold powders in continuous casting of steel contain fluorine through mainly CaF2 and occasionally NaF and Na3AlF6. Fluorine develops dangerous gases such as SiF4 and HF at high temperatures. In this study, CaF2 is partly replaced by substances such as Na2CO3, ZnO and Fe2O3.Sulfur free Portland cement clinker containing gypsum was used as a new product base. These additions developed comparable ...
متن کاملTribological properties of films formed by the reaction of carbon tetrachloride with iron
The tribological properties of halide films grown on iron by reaction with carbon tetrachloride vapor at a temperature of 617 K and a pressure of 1.7 Torr are compared, in ultrahigh vacuum, with FeCl2 films evaporated onto the surface. It is found that the reactively formed film has a slightly lower limiting friction coefficient than the evaporated layer ( 0.06 compared to 0.08), which may be d...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Iron and Steel Institute of Japan
سال: 1988
ISSN: 0021-1583,1881-1183
DOI: 10.2355/isijinternational1966.28.172