Deposition of Apatite on Carbon Nanofibers in Simulated Body Fluid

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Biomimetic growth of bone-like apatite via simulated body fluid on hydroxyethyl cellulose/polyvinyl alcohol electrospun nanofibers.

In this study, randomly oriented hydroxyethyl cellulose/polyvinyl alcohol (HEC/PVA) nanofibers were fabricated by electrospinning. The blend solutions of HEC/PVA with different weight ratio of HEC to PVA were prepared using water as solvent to fabricate nanofibers. These nanofibrous scaffolds were coated with bone-like apatite by immersing into 10x simulated body fluid (SBF) for different time ...

متن کامل

Surface oxynitriding dependence on apatite formation on biomedical titanium metal in a simulated body fluid

Biomedical titanium metals subjected to gas under precisely regulated oxygen partial pressures (PO2) from 10 to 10 Pa at 973 K for 1 hour were soaked in a simulated body fluid (SBF), whose ion concentrations were nearly equal to those of human blood plasma, at 36.5 C for up to 7 days. After soaking in SBF, the following relationship held: The growth rate of apatite decreased in the order PO2 of...

متن کامل

Formation and characteristics of the apatite layer on plasma-sprayed hydroxyapatite coatings in simulated body fluid.

Plasma-sprayed hydroxyapatite (HA) coatings were incubated in simulated body fluids (SBFs) for different periods of time to investigate the nucleation and growth of apatite on their surface. The layer that formed was recognized as having similarities to bone apatite because it is poorly crystallized, non-stoichiometric or calcium deficient, and contains carbonate and magnesium. Scanning electro...

متن کامل

Apatite-forming ability of bioactive poly(l-lactic acid)/grafted silica nanocomposites in simulated body fluid.

Bioactive PLLA/surface-grafted silica (g-SiO₂) nanocomposite scaffolds were fabricated by solid-liquid phase separation method. And solid PLLA/g-SiO₂ nanocomposite films were prepared by solution casting method. A series of parallel tube-like morphology and internal ladder-like structure of PLLA/g-SiO₂ nanocomposite scaffolds were observed by SEM. The formation of bone-like apatite in the simul...

متن کامل

Nanoscale Morphology of Apatite Precipitated onto Synthetic Hydroxyapatite from Simulated Body Fluid

Dense, polycrystalline, synthetic hydroxyapatite (HA) was incubated for 36 days in modified simulated body fluid (SBF) with increased HCO3 and reduced Cl ion concentrations (27 and 120 mM, respectively) closer to actual blood plasma than typical SBF. The resulting precipitated apatite layer was characterized by X-ray photoelectron spectroscopy (XPS) and contact angle measurements and found to b...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Nanomaterials

سال: 2011

ISSN: 1687-4110,1687-4129

DOI: 10.1155/2011/935320