Deposition of Hard Coating Layer by Friction Surfacing.
نویسندگان
چکیده
منابع مشابه
Experimental Investigation of Tool Steel M2 Coating on Mild Steel by Friction Surfacing
Friction surfacing is an emerging surface engineering technology, developed on the basic principle of friction welding, for depositing wear and corrosion resistant metallic coatings. In the present work coating of tool steel M2 were made on mild steel by friction surfacing by using 2 factorial designs with 3 factors at two levels for each. Process parameters developed a satisfactory deposition ...
متن کاملReview of Physical Vapour Deposition (pvd) Techniques for Hard Coating
This paper is a review on the status of hard coating of various physical vapour deposition (PVD) techniques and compare their properties. The use of hard and wear resistant PVD coatings on cutting tools is now widespread in global manufacturing for reducing production cost and improving productivity, all of which are essential if industry is to remain economically competitive. The review includ...
متن کاملMulti-response Optimization of the Mechanical and Metallurgical Properties of Al7075-T6 Deposition Process on Al2024-T351 by Friction Surfacing Using RSM and the Desirability Approach
Coating plays a significant role in surface engineering, which leads to the improvement of the mechanical and metallurgical properties of products. It also brings about economic benefits thanks to the cost savings of the improved properties of the surface of a product in particular. Friction surfacing is a relatively new way to create a homogeneous, fine-grained coating with amended resistance ...
متن کاملUniform Fe3O4 coating on flower-like ZnO nanostructures by atomic layer deposition for electromagnetic wave absorption.
An elegant atomic layer deposition (ALD) method has been employed for controllable preparation of a uniform Fe3O4-coated ZnO (ZnO@Fe3O4) core-shell flower-like nanostructure. The Fe3O4 coating thickness of the ZnO@Fe3O4 nanostructure can be tuned by varying the cycle number of ALD Fe2O3. When serving as additives for microwave absorption, the ZnO@Fe3O4-paraffin composites exhibit a higher absor...
متن کاملPREPARATION OF CATALYTIC COATING OF TITANIUM OXIDE BY MEANS OF ELECTROLYTIC DEPOSITION
In the current research, the optimum conditions for the electrolytic deposition of TiO2 coatings on titanium pieces were experimentally investigated. Flat pieces of commercially available titanium with dimensions of 50 x20 x3 mm were used as the anode and cathode electrodes. The coatings were applied on the cathode in an electrolyte solution essentially from water and methanol, containing diffe...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
سال: 1995
ISSN: 0288-4771
DOI: 10.2207/qjjws.13.432