Deposition of Titanium Layer on Steel Substrate Using PECVD Method: A Parametric Study
نویسندگان
چکیده
منابع مشابه
STUDY ON NIOBIUM CARBIDE COATING FORMATION ON AISI L2 STEEL USING THERMO-REACTIVE DEPOSITION METHOD
In the present research, to form niobium carbide coating on the surface of AISI L2 steel Thermo-Reactive Deposition method (TRD) in a molten bath was used. Niobium carbide coating treatment was carried out at 1173 K, 1273 K, and 1373 K for 2, 4, and 8 hours. The molten bath contained 20wt.% borax (Na2B4O7), 5 wt.% boric acid (B2O3), and 75 wt.% ferro-niobium. The presence and properties of...
متن کاملTitanium Oxide (TiO2) Coatings on NiTi Shape Memory Substrate Using Electrophoretic Deposition Process
The aim of the present research is to convert bioinert surface of NiTi to bioactive and biocompatible surface. In order to develop a bioactive and corrosion resistant film on NiTi, electrophoretic deposition process was done and TiO2 particles were deposited on the NiTi surface. Suspensions including TiO2 particles were prepared using a mixture of acetone and n-butanol (0%, 30%, 60%, 80% and 10...
متن کاملa study on construction of iranian life tables: the case study of modified brass logit system
چکیده ندارد.
15 صفحه اولSeed - layer deposition Patterning Insulator deposition and patterning Seed - layer deposition Seed layer Substrate
Damascene Cu electroplating for on-chip metallization, which we conceived and developed in the early 199Os, has been central to IBM's Cu chip interconnection technology. We review here the challenges of filling trenches and vias with Cu without creating a void or seam, and the discovery that electrodeposition can be engineered to give filling performance significantly better than that achievabl...
متن کاملParametric Optimization of TIG Welding on Stainless Steel (202) & Mild Steel by using Taguchi Method
The main objective of industries reveal with manufacturing better quality product at low cost and increase productivity. TIG welding is most vital and common operation use for joining of two similar or dissimilar parts with heating the material or applying the pressure by using the filler material for increasing productivity with less time and cost constrain. The TIG welding parameters are the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Sciences and Applications
سال: 2014
ISSN: 2153-117X,2153-1188
DOI: 10.4236/msa.2014.53018