Description of Temperature Dependence and Creep Deformation of 60 Sn-40 Pb Solder Alloys.
نویسندگان
چکیده
منابع مشابه
Creep Behavior of a Sn-Ag-Bi Pb-Free Solder
Compression creep tests were performed on the ternary 91.84Sn-3.33Ag-4.83Bi (wt.%, abbreviated Sn-Ag-Bi) Pb-free alloy. The test temperatures were: −25 °C, 25 °C, 75 °C, 125 °C, and 160 °C (± 0.5 °C). Four loads were used at the two lowest temperatures and five at the higher temperatures. The specimens were tested in the as-fabricated condition or after having been subjected to one of two air a...
متن کاملMeasuring intrinsic elastic modulus of Pb/Sn solder alloys
Young’s modulus (E) values published in the literature for the eutectic Pb37/Sn63 and near eutectic Pb40/Sn60 solder alloy vary significantly. One reason for this discrepancy is different testing methods for highly rate sensitive heterogeneous materials, like Pb/Sn alloys, yield different results. In this paper, we study different procedures used to obtain the elastic modulus; analytically, by ...
متن کاملDevelopment of Sn-Based, Low Melting Temperature Pb-Free Solder Alloys
Low temperature, Sn-based Pb-free solders were developed by making alloy additions to the starting material, 96.5Sn-3.5Ag (mass%). The melting behavior was determined using Differential Scanning Calorimetry (DSC). The solder microstructure was evaluated by optical microscopy and electron probe microanalysis (EPMA). Shear strength measurements, hardness tests, intermetallic compound (IMC) layer ...
متن کاملNanoindentation of Pb/Sn solder alloys; experimental and finite element simulation results
A thermodynamics based damage mechanics coupled constitutive model is used to simulate the nanoindentation experiment on eutectic commercial Pb/Sn solder alloys. The study is aimed at explaining the apparent size dependent behavior observed at small indentation depths for this class of highly rate dependent materials. Interest is at small depths of indentation and a small-strains small-displace...
متن کاملA Creep Model for Solder Alloys
Demand for long-term reliability of electronic packaging has lead to a large number of studies on viscoplastic behavior of solder alloys. Various creep models for solder alloys have been proposed. They range from purely empirical to mechanism based models where dislocation motion and diffusion processes are taken into account. In this study, most commonly used creep models are compared with the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1999
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.65.1795