Design & Analysis of S-Band Right Hand Circularly Polarized Conical Horn Antenna for NavIC Receiver
نویسندگان
چکیده
منابع مشابه
Design, simulation and Fabrication of Circularly Polarized Fabry-Perot Antenna for Ku Band
This paper deals with the design and simulation of a RHCP Fabry-Perot antenna for 14.5 GHz. Based on transmission line model, partially Reflecting Surface (PRS) was designed so thatgain enhancement and circular polarization simultaneously obtained. PRS consist of a square loop and meander-line at the top and bottom respectively. In order to achieve the resonance condition in orthogonal componen...
متن کاملDesign and Performance Analysis of Dual band Circularly Polarized C-Slot Patch Antenna
In this paper dual band aperture coupled Circularly Polarized (CP) C-Slotted antenna with a small frequency ratio exited through a single feed is proposed for GPS application. The optimized design of CSlot antenna has been validated using IE3D Electromagnetic wave simulator. The C-slot is asymmetrical about the centre of the antenna. The antenna parameters can be optimized by changing the physi...
متن کاملDesign and Simulation of Circularly Polarized Compact Microstrip Patch Antenna for C-Band Applications
Abstract—A probe-fed, slotted rectangular patch antenna has been proposed. Bandwidth enhancement has been achieved by suitably cutting slots into the rectangular patch, and efficiently exciting the slot by short circuiting the conducting patch through the dielectric substrate beyond the edge of the slot. Proposed antenna is suitable for various ground based and airborne applications in C-Band. ...
متن کاملCircularly Polarized Patch Antenna With Enhanced Band Width & Gain
In this paper, one 5 × 5 antenna array are studied. In each array, one probe-fed circularly polarized (CP) microstrip patch antenna is placed at the center as the driven antenna and is gapped coupled to the remaining elements. It is investigated that CP performance of the patch can be proved by properly arranging these parasitic elements. The driven patch is a perturbed square one with two diag...
متن کاملTri-band Circularly Polarized 3-Layer Stacked Patch Antenna
A probe-fed circularly polarized 3-layer stacked patch antenna is presented and simulated by using Commercial Ansoft High Frequency Structure Simulator. The design consists of three patches and three substrates. The lower and middle patches are of square-shaped where as the upper patch is of triangular-shaped. One slot is inserted in the lower layer, two slots are inserted in the middle layer a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Engineering & Technology
سال: 2018
ISSN: 2227-524X
DOI: 10.14419/ijet.v7i3.12.16169