Design and Analysis of Single Switch Transformer Less DC-DC Converter with Universal Input Voltage for Fuel Cell based Vehicles
نویسندگان
چکیده
A new single switch solar powered high gain step-up DC-DC converter is proposed for plug-in hybrid battery charger in Electric vehicle (EV). The topology utilizes a L2C3D2network to obtain voltage and reduce the stress on power switch. Additionally, has universal input order suit soft output characteristics of fuel cell. cell relatively low current, it as its drops current increases. Therefore, cannot be directly interfaced dc-link bus (400V) inverter inside EV. This dc-dc feature with wide range this have ripple prolong life time /solar cell, common ground between ports avoid additional EMI maintenance safety problem. control strategy modelled simulated using MATLAB -Simulink. proto type experimental been fabricated tested. analysis was done results are line simulation results.
منابع مشابه
Analysis and Design of a New Single Switch Non-Isolated Buck-Boost dc-dc Converter
In this paper, a new transformerless buck-boost converter based on ZETA converter is introduced. The proposed converter has the ZETA converter advantages such as, buck-boost capability and input to output DC insulation. The suggested converter voltage gain is higher than the classic ZETA converter. In the presented converter, only one main switch is utilized. The proposed converter offers low v...
متن کاملOn-grid and Off-grid Operation of Multi-Input Single-Output DC/DC Converter based Fuel Cell Generation System
This paper presents the modeling and simulation of a proton exchange membrane fuel cell (PEMFC) generation system for off-grid and on-grid operation and configuration. A fuel cell DG system consists of a fuel cell power plant, a DC/DC converter and a DC/AC inverter. The dynamic model for fuel cell array and its power electronic interfacing are presented also a multi-input single output (MISO) D...
متن کاملDesign of Single Input Multiple Output DC-DC Converter
This paper proposes a design of single input multiple output (SIMO) dc–dc converter. The proposed converter can generate the voltage of a low voltage input to controllable levels of boosted output voltage and it can also produce the inverted output voltage. This dc-dc converter utilizes the properties of voltage clamping and soft switching based on a coupled inductor. In this paper, the design ...
متن کاملHybrid Z-Source DC-DC Converter with ZVZCS and Power Transformer Resetting: Design, Modeling, and Fabrication
This paper introduces a novel two transistors forward topology employing a z-source to achieve ZVZCS and power transformer resetting for various applications. Comparing with the forward converter, this topology has the advantage of displaying ZCS condition with an added Z-Source and no additional switches when the switches turn on, and that ZVS condition happens when the switches turn off. Duty...
متن کاملControlled Single Switch Step down AC/DC Converter without Transformer
This paper presents a transformer less ac/dc converter which can be used in voltages between 90230 Vrms. Instead of a transformer, this topology consists of a buck dc/dc converter and a buck boost dc/dc converter. By the absence of transformer, reduce the complexity of converter and it is cost effective. Buck dc/dc converter keeps o/p voltage below the line voltage; limit the leakage current. B...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Advanced Research in Science, Communication and Technology
سال: 2021
ISSN: ['2581-9429']
DOI: https://doi.org/10.48175/ijarsct-1558