Design and characterization of a novel toroidal split-ring resonator
نویسندگان
چکیده
منابع مشابه
Design of Multiband PIFA loaded with Split Ring Resonator
In this paper, a multiband planar inverted-F antenna (PIFA) with high gain and appreciable bandwidth at the resonant frequencies is designed using metamaterial concept. The proposed PIFA without metamaterial is designed to resonate at 7.46 GHz with return loss of -23.71 dB and gain value 5.41 dBi. The designed antenna is having maximum possible bandwidth of 361.8 MHz. The proposed PIFA with spl...
متن کاملDesign of Hexagonal Split Ring Resonator using HFSS
In this paper, Hexagonal Split Ring Resonator (HSRR) and Square Split Ring Resonator (SSRR) are designed using HFSS simulation software. Both split ring resonators are based on the Metamaterial and same parameters. Then after compare the simulation result of HSRR and SSRR. HFSS simulation of the Hexagonal SRR shows improved Return Loss and VSWR i.e. -44.7 dB and 1 respectively compare to Square...
متن کاملRadiation properties of a split ring resonator and monopole composite
We studied the far field radiation properties of a new resonator antenna composed of split ring resonators (SRRs) and a monopole. It is shown that the antenna size at the operation frequency (3.52 GHz) is approximately one tenth of the free space wavelength (λ/10). Moreover, increasing the number of SRRs yields steerability properties. These achievements provide a way to create rather small ste...
متن کاملImproved Split - Ring Resonator for Microfluidic Sensing
We present a method of making low loss split-ring resonators for microfluidic sensing at microwave frequencies using silver coated copper wire. We show that a simple geometric modification and the use of square cross-section wire give greater electric field confinement in the capacitive region of the resonant sensor. We use a combination of theoretical analysis, finite element simulations and e...
متن کاملDesign and Simulation of a Metal-Insulator-Metal Filter Based on Plasmonic Split Ring
In this paper, a plasmonic filter made of a split ring, two U-shaped structures and two straight waveguides is designed and investigated. In the proposed structure, the split ring and U-shaped structures are situated between straight waveguides. Simulations are done based on FDTD method. Split ring, U-shaped structures and straight waveguides are made of air in the silver background. In the pro...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Review of Scientific Instruments
سال: 2016
ISSN: 0034-6748,1089-7623
DOI: 10.1063/1.4940725