Design and comparison analysis of powder metallurgy press manipulator

Modeling and Simulation of Press and Sinter Powder Metallurgy

EFFECTIVE COMPUTER SIMULATIONS of metal powder compaction and sintering are at the top of the powder metallurgy industry’s wish list. There is much anticipated advantage to such efforts, yet there are problems that will inhibit widespread implementation. Press-sinter powder metallurgy computer simulations currently focus on the use of minimal input data to help with process setup. Although the ...

Porous, Superelastic NiTi Produced by Powder-Metallurgy

Near-stoichiometric NiTi was foamed in the solid state at elevated temperatures through creep expansion of highpressure argon pores previously entrapped during powder consolidation. A sample with 17% porosity was found to be superelastic up to a compressive stress of 800 MPa.

COMPARISON OF MECHANICAL AND ELECTRICAL PROPERTIES OF PIEZOELECTRIC COMPOSITES PZT/ZnO AND PZT/Al FABRICATED BY POWDER METALLURGY

Lead zirconate titanate (PZT) as a piezoelectric ceramic has been used widely in the fields of electronics, biomedical engineering, mechatronics and thermoelectric. Although, the electrical properties of PZT ceramics is a major considerable, but the mechanical properties such as fracture strength and toughness should be improved for many applications. In this study, lead monoxide, zirconium ...

A Comparison of the Plastic-flow Response of a Powder-metallurgy Nickel-base Superalloy (postprint)

Design and Kinematic Analysis of a 4-DOF Serial-Parallel Manipulator for a Driving Simulator

This paper presents the kinematic analysis and the development of a 4-degree-of-freedom serial-parallel mechanism for large commercial vehicle driving simulators. The degrees of freedom are selected according to the target maneuvers and the structure of human motion perception organs. Several kinematic properties of parallel part of the mechanism under study are investigated, including the inve...