Design and Fabrication of UVC based Sanitizing System
نویسندگان
چکیده
منابع مشابه
simulation and design of electronic processing circuit for restaurants e-procurement system
the poor orientation of the restaurants toward the information technology has yet many unsolved issues in regards to the customers. one of these problems which lead the appeal list of later, and have a negative impact on the prestige of the restaurant is the case when the later does not respond on time to the customers’ needs, and which causes their dissatisfaction. this issue is really sensiti...
15 صفحه اولDESIGN AND FABRICATION OF A SOPHISTICATED VERNEUIL SYSTEM
Abstract: fabricated. Modifications carried out in different parts of the old system in order to control mostof the growth parameters with more accuracy. The fabricated system was used to grow sapphiresingle crystals with almost 10 mm in diameter and 50 mm in length. The crystallinity andstructure of the grown crystals were characterized by computer aided single crystal X-raydiffraction techniq...
متن کاملfabrication of new ion sensitive field effect transistors (isfet) based on modification of junction-fet for analysis of hydronium, potassium and hydrazinium ions
a novel and ultra low cost isfet electrode and measurement system was designed for isfet application and detection of hydronium, hydrazinium and potassium ions. also, a measuring setup containing appropriate circuits, suitable analyzer (advantech board), de noise reduction elements, cooling system and pc was used for controlling the isfet electrode and various characteristic measurements. the t...
Design and Fabrication of Tensegrity Structures a computer based system
Tensegrity structures are composed of tension compression components, where the compression components (bars) are discontinuously enclosed within continuous tensile components (cables). From an engineering point of view, a tensegrity structure is characterized by geometric non-linearity and large displacements under loading. Therefore, its prestressed shape and deformation under loading are the...
متن کاملDesign and Fabrication of the Mechanical Part of a Prototype Multileaf Collimator System
Introduction: Multileaf collimator (MLC) is state of the art among the radiation field shaping systems for conformal radiotherapy techniques. Some advantages of this system are as follow: reduction of treatment time, higher precision in conforming the radiation field to the projection of the target volume and lowering the chance of errors made by technologists. The purpose of this research was ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Innovative Technology and Exploring Engineering
سال: 2021
ISSN: 2278-3075
DOI: 10.35940/ijitee.h9114.0610821