Design and implementation of GPS baseband correlator
نویسندگان
چکیده
منابع مشابه
Ultra Wide - band Baseband Design and Implementation
Acknowledgment There is no way I could come through the course of the project without the help from these people and institutions. First of all, I would like to thank my advisor Professor Bob Brodersen for his support and guidance ever since I joined the group. His trust and insight has helped me out at the various time of this project. Also his personality and vision has offered me a great mod...
متن کاملPortable GPS Baseband Logging
We present the design and implementation of a highly portable multi-antenna datalogging system which can log several minutes of multi-channel raw GPS L1 baseband. In addition, our design interleaves two serial data streams with the baseband data, allowing, e.g., inertial data to remain synchronized with the data stream. The system is FPGAbased and uses two CompactFlash cards for storage. The da...
متن کاملEfficient baseband design and implementation for high-throughput transmitters
Wireless communications are accelerating into the realm of higher data rates from hundreds of megabits to tens of gigabits per second. Increase in data rate requires higher throughput and higher utilization of spectral bandwidth. At the same time, we are seeing a demand for smaller chipsets with lower power budgets. Digital basebands with increased energy-efficiency are needed while fitting wit...
متن کاملDesign and Implementation of Field Programmable Gate Array Based Baseband Processor for Passive Radio Frequency Identification Tag (TECHNICAL NOTE)
In this paper, an Ultra High Frequency (UHF) base band processor for a passive tag is presented. It proposes a Radio Frequency Identification (RFID) tag digital base band architecture which is compatible with the EPC C C2/ISO18000-6B protocol. Several design approaches such as clock gating technique, clock strobe design and clock management are used. In order to reduce the area Decimal Matrix C...
متن کاملDesign and Implementation of Complex Filter for GPS Receiver
The paper proposes fourth order Butterworth complex filter for the Global Positioning System (GPS) receiver, which the center frequency of complex filter is 2MHz and bandwidth is 2 MHz. The operational amplifier (OPA) is designed as twostage fully differential OPA. The gain bandwidth (GBW) of operation amplifier reaches 300MHz, the gain of the DC is 58.3dB, the phase margin is 5 7 and the pow...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2018
ISSN: 1742-6588,1742-6596
DOI: 10.1088/1742-6596/1026/1/012016