Design and off-design simulations of combined cycles for offshore oil and gas installations
نویسندگان
چکیده
منابع مشابه
simulation and design of electronic processing circuit for restaurants e-procurement system
the poor orientation of the restaurants toward the information technology has yet many unsolved issues in regards to the customers. one of these problems which lead the appeal list of later, and have a negative impact on the prestige of the restaurant is the case when the later does not respond on time to the customers’ needs, and which causes their dissatisfaction. this issue is really sensiti...
15 صفحه اولDesign for safety framework for offshore oil and gas platforms
Offshore platform installation is associated with several inherent risks arising from majorcritical safety challenges such as fires, explosions, blowouts, falling objects, earthquake, extreme weather,and impact from moving objects such as helicopters or ships. These critical problems are due largely to designerrors or inadequacies, and poor maintenance. The safety challenges highlig...
متن کاملتحلیل موتور توربوپراپ در شرایط on-design و off-design
در این رساله عملکرد یک موتور توربوپراپ که ملخ آن از نوع clark y 5868-r9 است در شرایط نقطه طرح (on- design) و خارج از نقطه طرح (off- design) مورد مطالعه قرار گرفته شده است. موتور توربوپراپ یکی از انواع موتور جت در تراست بالا و مصرف مخصوص سوخت پایین است که عدد ماخ پروازی آن هرگز از 8/. تجاوز نمی کند. دور موتور های توربوجت به حدی زیاداست که در صورت اتصال مستقیم به ملخ، سرعت نوک تیغه های ملخ به سرع...
15 صفحه اولsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
investigating the feasibility of a proposed model for geometric design of deployable arch structures
deployable scissor type structures are composed of the so-called scissor-like elements (sles), which are connected to each other at an intermediate point through a pivotal connection and allow them to be folded into a compact bundle for storage or transport. several sles are connected to each other in order to form units with regular polygonal plan views. the sides and radii of the polygons are...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Thermal Engineering
سال: 2013
ISSN: 1359-4311
DOI: 10.1016/j.applthermaleng.2013.01.022