Design and Performance Model of Probe-Fed Rectangular Patch Antenna for LTE 2300 MHz Smart Phone and Portable Computer Applications
نویسندگان
چکیده
منابع مشابه
A Design Rule for Inset-fed Rectangular Microstrip Patch Antenna
In our paper, an inset-fed microstrip patch antenna has been designed and the dependency of resonant frequency on the notch gap and the feed line geometry has been studied. Our study suggests that a narrower notch resulted in better impedance matching. A design rule has also been formulated and presented the performance of the proposed design. Key-Words: Inset-fed, microstrip antenna
متن کاملCompact CPW-fed Circular Patch Antenna for UWB Applications
In this paper, a novel CPW-fed antenna is presented for UWB applications. The antenna mainly comprises of a simple circular patch and a modified ground plane. The inclusion of two novel symmetrical rectangular slots with inner area of 3×2.8 mm2 to the top corners of the antenna creates a new path for the current and consequently leads to the bandwidth enhancement. A rectangular stub is also ado...
متن کاملMiniaturized Probe-Fed Elliptical Microstrip Patch Antenna for Radiolocation Applications
This letter presents a miniaturized probe-fed elliptical microstrip patch antenna (PF-EMPA) targeting the 8.50-10.55 GHz band for radiolocation applications. The proposed design is composed of an elliptical patch inserted into an elliptical slot. In order to achieve our goals and control the impedance matching, we adjusted the offset distance from the elliptical patch to the side of the ellipti...
متن کاملan infinite planar array of rectangular microstrip patch antenna analysis
the methods which are used to analyze microstrip antennas, are divited into three categories: empirical methods, semi-empirical methods and full-wave analysis. empirical and semi-empirical methods are generally based on some fundamental simplifying assumptions about quality of surface current distribution and substrate thickness. thses simplificatioms cause low accuracy in field evaluation. ful...
15 صفحه اولDesign of Rectangular Microstrip Patch Antenna Array
In this paper the rectangular microstrip patch antenna arrays has been designed for S, C and X-band application by using the IE3D simulator. Roger RT/duroid material with dielectric constant 2.2 and height 1.588 has been used as a substrate material. Microstrip inset line feed has been used for feeding the rectangular patch antenna. Here 1x2 and 1x4 patch antenna array has been designed using s...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Computer and Communication Engineering
سال: 2013
ISSN: 2010-3743
DOI: 10.7763/ijcce.2013.v2.277