DESIGN AND SIMULATION ANALYSIS OF A TEXTILE BASED METAMATERIAL PERFECT ABSORBER FOR ENERGY HARVESTING APPLICATIONS AT WIFI BAND
نویسندگان
چکیده
Metamaterials, which are called as left-handed materials, exhibit electromagnetic properties that do not exist in nature, such negative refractive index and reverse Doppler effect, at the frequency range for they designed. These unique of metamaterials have made them indispensable a wide variety applications sensor applications, signal absorption, antenna, energy harvesting. In this study, design analysis metamaterial (MTM) perfect absorber 5 GHz band were performed to investigate usability proposed structure harvesting applications. The results study revealed MTM has potentials be used
منابع مشابه
Dual band metamaterial perfect absorber based on artificial dielectric “molecules”
Dual band metamaterial perfect absorbers with two absorption bands are highly desirable because of their potential application areas such as detectors, transceiver system, and spectroscopic imagers. However, most of these dual band metamaterial absorbers proposed were based on resonances of metal patterns. Here, we numerically and experimentally demonstrate a dual band metamaterial perfect abso...
متن کاملMiniaturization for ultrathin metamaterial perfect absorber in the VHF band
An efficient resolution for ultrathin metamaterial perfect absorber (MPA) is proposed and demonstrated in the VHF radio band (30-300 MHz). By adjusting the lumped capacitors and the through vertical interconnects, the absorber is miniaturized to be only λ/816 and λ/84 for its thickness and periodicity with respect to the operating wavelength (at 102 MHz), respectively. The detailed simulation a...
متن کاملPerfect metamaterial absorber.
We present the design for an absorbing metamaterial (MM) with near unity absorbance A(omega). Our structure consists of two MM resonators that couple separately to electric and magnetic fields so as to absorb all incident radiation within a single unit cell layer. We fabricate, characterize, and analyze a MM absorber with a slightly lower predicted A(omega) of 96%. Unlike conventional absorbers...
متن کاملDesign, Fabrication and Measurement of Two-Layered Quadruple-Band Microwave Metamaterial Absorber
The design, simulation, fabrication, and measurement of two structures of metamaterial absorbers (MA) is investigated at microwave frequency in this paper. By stacking of one layer structure on the top of each other, a two-layered structure is generated. The unit cell at each layer consisting of two sets of various circular and square patches are designed so that the structure exhibit quad band...
متن کاملUltrathin Six-Band Polarization-Insensitive Terahertz Perfect Metamaterial Absorber Based on a Cross-Cave Patch Resonator
A simple design of an ultrathin six-band polarization-insensitive terahertz perfect metamaterial absorber (PMMA) composed of a metal cross-cave-patch resonator (CCPR) placed over a ground plane was proposed and investigated numerically. The numerical simulation results demonstrate that the average absorption peaks are up to 95% at six resonance frequencies with high quality-factors (>65). In ad...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Usak university journal of engineering sciences
سال: 2021
ISSN: ['2651-3447']
DOI: https://doi.org/10.47137/uujes.1037884