Design Inset Fed Microstrip Patch Antenna for L Band Applications
نویسندگان
چکیده
Present paper focuses on design and simulation of an inset fed rectangular microstrip patch antenna for GPS applications. The proposed is designed at frequency 1.9 GHz which comes in L-Band region simulated using Electromagnetic Simulator such as HFSS software with three different dielectric substrates comparing their performance characteristics gain, bandwidth, beam width, VSWR return loss. results shows that the maximum bandwidth obtained FR4 substrate minimum found Arlon AD320 substrate, where gain air (vaccum) substrate. has been range highly suitable
منابع مشابه
A Design Rule for Inset-fed Rectangular Microstrip Patch Antenna
In our paper, an inset-fed microstrip patch antenna has been designed and the dependency of resonant frequency on the notch gap and the feed line geometry has been studied. Our study suggests that a narrower notch resulted in better impedance matching. A design rule has also been formulated and presented the performance of the proposed design. Key-Words: Inset-fed, microstrip antenna
متن کاملInset Feed Microstrip Patch Antenna
Abstract: An inset feed microstrip patch antenna is designed to increase the bandwidth and return loss. RT-Duriod with dielectric constant of 4.4 is used as a substrate for the proposed antenna. RT-Duriod is a having a lowest dielectric constant and can reduce the dielectric losses associated with microstrip patch antenna. This antenna is useful for 2.4 GHz frequency, which comes under ISM (Ind...
متن کاملDesign of Circular Polarized Microstrip Patch Antenna for L Band
In this paper, we share our experience of designing a circularly polarized square patch antenna at L band. The antenna is designed using a relatively cheap substrate FR-4 with permittivity r = 4:4 and loss tangent tan = 0:02. The antenna has a gain of 5dB. Simulated response shows that the designed antenna has an input impedance(Zin) of 50 approximately. An efficiency of 65% is obtained for ...
متن کاملA Capacitive Fed Microstrip Patch Antenna with Air Gap for Wideband Applications (RESEARCH NOTE)
In this paper a microstrip antenna on a suspended substrate with capacitive feed is presented. capacitive feed is created by a slot within the rectangular patch around the feed point. The proposed antenna exhibits a much higher impedance bandwidth of about 47% (S11 < −10 dB). Effects of key design parameters such as the air gap between the substrate and the ground plane, the gap width between r...
متن کاملBroadband Stacked Microstrip Patch Antenna for L-Band Operation: FDTD Modeling
This paper presents a novel implementation of an electromagnetically coupled patch antenna using air gap filled substrates to achieve the maximum bandwidth. We also propose an efficient modeling technique using the FDTD method which can substantially reduce the simulation cost for modeling the structure. The simulated results have been compared with measurement to show the broadband behavio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International journal of innovative technology and exploring engineering
سال: 2021
ISSN: ['2278-3075']
DOI: https://doi.org/10.35940/ijitee.d8595.0210421