Design Method of Emission Regulator for Ionization Gauge
نویسندگان
چکیده
منابع مشابه
Design and Simulation of Hot Cathode Ionization Vacuum Gauge with no X-Ray Limitations
In this paper, the MEMS type ionization gauge with no X-Ray limitations has been presented. Having the dimensions of 2.4 mm× 0.8mm × 1.4 mm, the designed gauge is 9000 times smaller than the conventional type and can operate in HV and UHV pressures up to 5×10-9 torr. Operating at the temperature of 750°C, the cathode of proposed gauge is implemented using nickel and works in a way in...
متن کاملControl System Design for a Surface Effect Ship by Linear-Quadratic Regulator Method
In this paper, the main goal is to reduce the heave motion between a surface effect ship (SES) and a wind turbine in order to safely transfer equipment and person to SES. For this purpose, an LQR control system is designed to damp the vertical motion of the surface effect ship in critical sea states including high-frequency and high amplitude regular waves as well as high frequency irregular wa...
متن کاملinvestigating the feasibility of a proposed model for geometric design of deployable arch structures
deployable scissor type structures are composed of the so-called scissor-like elements (sles), which are connected to each other at an intermediate point through a pivotal connection and allow them to be folded into a compact bundle for storage or transport. several sles are connected to each other in order to form units with regular polygonal plan views. the sides and radii of the polygons are...
Rain Gauge Station Network Design for Hormozgan Province in Iran
A rain gauge network should serve general as well as specific purposes such as water supply, hydropowergeneration, flood forecasting, irrigation, and flood control. The level of accuracy a network can achieve depends onthe number and locations of gauges in the network. In this study, a rain gauge network was designed for Hormozganprovince in the south of Iran. Monthly rainfall totals from 124 r...
متن کاملdesign of a self tuning voltage regulator for synchronous generators
this paper presents a self-tuning pid (proportional and integral and derivative) controller for regulating terminal voltage synchronous generators. in order to modify the system reponse and to overcome the difficulties of self tuning controllers, a dual rate sampling control system was used. system results demonstrated usfulness of the proposed regulator. the designed controller is simple and c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Mass Spectrometry Society of Japan
سال: 1960
ISSN: 1884-3271,1340-8097
DOI: 10.5702/massspec1953.1960.16_30