Design of a Compliant Mechanism Based Four-Stage Amplification Piezoelectric-Driven Asymmetric Microgripper
نویسندگان
چکیده
منابع مشابه
Design of a Piezoelectric Meso-Scale Mobile Robot: A Compliant Amplification Approach
In this paper, the development of a novel piezoelectric-based locomotion design for a meso-scale mobile robot is described. The design exploits a compliant mechanical structure that enables piezoelectric forces to be amplified and transmitted to “legs” that propel the robot through a lift and pull scheme. The lift and pull design contrasts with typical slip/stick approaches that assume the iner...
متن کاملFault Tolerant Control of a Teleoperated Piezoelectric Microgripper
This paper presents a new architecture of control for micro-teleoperation system using a fault tolerant control (FTC) strategy to compensate for the degradation effects of piezoelectric-based microgipping system. The proposed strategy uses passivity approach for the bilateral controller and robust fault tolerant control (FTC) for the two-fingered microgripper system. First, the bilateral contro...
متن کاملElectrostatically Driven Microgripper
In this work we report on microactuators and microgrippers fabricated from SOI (Silicon On Insulator) wafers by a surface and bulk micromachining fabrication technology. The main advantages of this technology are: a) large thickness of the devices (10 μm up to 40 μm) resulting in devices which are stable against disturbing forces perpendicular (z-direction) to the ground plate. b) the small num...
متن کاملMechanical design, analysis and testing of a large-range compliant microgripper
This paper presents the mechanical design, analysis, fabrication, and testing procedures of a new large-range microgripper which is based on a flexible hinge structure. The uniqueness of the gripper is that the gripper arms not only provide large gripping range but also deliver approximately rectilinear movement as the displacement in nonworking direction is extremely small. The large gripping ...
متن کاملPiezoelectric Microgripper Equipped with a Smart CMOS Camera
This paper deals with the design of a micro-eyein-hand architecture. It consists of a smart camera embedded on a gripper. The camera is a high speed (10 000 fps) CMOS sensor of 64 × 64 pixels. Each pixel measures 35 μm × 35 μm and includes a photodiode, an amplifier, two storage capacitors, and an analog arithmetic unit. The gripper consists of a 4 dof (degrees-of-freedom) (y+, y-, z+, z-) micr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Micromachines
سال: 2019
ISSN: 2072-666X
DOI: 10.3390/mi11010025