Design of a Secondary Freeform Lens of UV LED Mosquito-Trapping Lamp for Enhancing Trapping Efficiency
نویسندگان
چکیده
منابع مشابه
Freeform lens design for LED collimating illumination.
We present a simple freeform lens design method for an application to LED collimating illumination. The method is derived from a basic geometric-optics analysis and construction approach. By using this method, a highly collimating lens with LED chip size of 1.0 mm × 1.0 mm and optical simulation efficiency of 86.5% under a view angle of ± 5 deg is constructed. To verify the practical performanc...
متن کاملinvestigating the feasibility of a proposed model for geometric design of deployable arch structures
deployable scissor type structures are composed of the so-called scissor-like elements (sles), which are connected to each other at an intermediate point through a pivotal connection and allow them to be folded into a compact bundle for storage or transport. several sles are connected to each other in order to form units with regular polygonal plan views. the sides and radii of the polygons are...
Freeform LED lens for uniform illumination.
Light flux from LED must be redistributed to meet the needs of lighting in most cases, a new method is proposed for its secondary optic design. Based on refractive equation and energy conservation, a set of first-order partial differential equations which represent the characters of LED source and desired illumination were presented. The freeform lens was constructed by solving these equations ...
متن کاملDesign of Fresnel Lens-Type Multi-Trapping Acoustic Tweezers
In this paper, acoustic tweezers which use beam forming performed by a Fresnel zone plate are proposed. The performance has been demonstrated by finite element analysis, including the acoustic intensity, acoustic pressure, acoustic potential energy, gradient force, and particle distribution. The acoustic tweezers use an ultrasound beam produced by a lead zirconate titanate (PZT) transducer oper...
متن کاملTesting and design of a lens system for atom trapping and fluorescence detection
We present methods and results of the testing of an inexpensive home-made diffraction limited lens system, the design of which was proposed in [1] and which has since been used (with slight alterations) by several research groups (e.g. [2, 3, 4]). Our system will be used for both: focussing a collimated laser beam at a wavelength of λ = 830 nm down to a narrow spot and for collimating fluoresce...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Crystals
سال: 2018
ISSN: 2073-4352
DOI: 10.3390/cryst8090335