Design of a Surface Plasmon Resonance Temperature Sensor with Multi-Wavebands Based on Conjoined-Tubular Anti-Resonance Fiber
نویسندگان
چکیده
In this work, a surface plasmon resonance (SPR) temperature sensor based on con-joined-tubular anti-resonance optical fiber (CTF) was theoretically designed and analyzed using the finite element method. The CTF cladding composed of eight pairs conjoined tubes, one or two holes tubes were selectively coated with gold to generate SPR effect. Alcohol injected into core work as sensing medium vapor deposition. proposed structure exhibited excellent birefringence produced more than six resonant peaks in different wavebands X Y polarization. positions those sensitive change, simulated sensitivity about 3.2–3.6 nm/°C. multiple working could be used for self-verification. Moreover, influence structural parameters performance detail. Possessing features high sensitivity, good birefringence, measuring wavebands, self-verification, CTF-based has great potential practical applications such biological research chemical sensing.
منابع مشابه
Fabrication and Characterization of the Fiber Optical Taper for a Surface Plasmon Resonance Sensor
For a fiber optical surface plasmon resonance (SPR) sensor a short part of its cladding should be removed to coat a thin layer of a metal. Usually this is problematic when an optical fiber with small core diameter is used. In this paper, a new method using µliter droplet of the HF acid for short fiber optical taper fabrication is reported. Using this method in a multi-mode optical fiber w...
متن کاملPhysical modeling of a refractive index photonic crystal fiber based on surface plasmon resonance
This article has no abstract.
متن کاملDesign and numerical simulation of surface plasmon resonance (SPR) skin pressure sensor based on graphene grating-sheet modifications
This article has no abstract.
متن کاملFiber Optic Surface Plasmon Resonance based Refractive Index Sensor
In the present study, a surface plasmon resonance (SPR) based fiber optic sensor is proposed. The extreme sensitivity of SPR modes on the surrounding refractive index has been exploited to make the sensor. The optical fiber is coated with gold film which supports the propagation of surface plasmons. The SPR dip in the transmission spectrum is observed and its shift with varying refractive indic...
متن کاملfabrication and characterization of the fiber optical taper for a surface plasmon resonance sensor
for a fiber optical surface plasmon resonance (spr) sensor a short part of its cladding should be removed to coat a thin layer of a metal. usually this is problematic when an optical fiber with small core diameter is used. in this paper, a new method using µliter droplet of the hf acid for short fiber optical taper fabrication is reported. using this method in a multi-mode optical fiber with th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Photonics
سال: 2021
ISSN: ['2304-6732']
DOI: https://doi.org/10.3390/photonics8060231