Design of an Edge Slotted Waveguide Antenna Array Based on T-Shaped Cross-Section Waveguide
نویسندگان
چکیده
منابع مشابه
An Ultralow Cross-Polarization Slot Array Antenna in Narrow Wall of Angled Ridge Waveguide
A low cross-polarization slot array antenna in the narrow wall of ridge waveguide is presented. A non-angled slot which is created in the narrow wall of the ridge waveguide is considered to be used as radiating resonant slot. The normalized resistance and normalized reactance curves are presented for design purposes. A six element slot array waveguide antenna with ridges on its narrow wall is t...
متن کاملDesign of Millimeter-wave Slotted-Waveguide Planar Antenna for Sub-array of Beam-scanning Antenna
Beam-scanning antennas are attractive for high-bit-rate data communication systems and high resolution sensing systems in millimeter-wave band. Waveguide antenna is one of the most attractive antennas for such millimeter-wave systems because of its low loss and high efficiency characteristics in high frequency band. Horizontally-beam-scanning antennas such as phased arrays and DBF (Digital Beam...
متن کاملA Wideband Slotted Waveguide Antenna Array for Sar Systems
Possibilities for the extension of the operational frequency band of slotted waveguide antennas are studied. It is shown that by using both conventional longitudinal slots and subarraying techniques it is possible to reach the relative bandwidth of about 15%. This result is illustrated by the development of a novel slotted waveguide antenna for high-resolution SAR applications. The antenna oper...
متن کاملdesigning and simulation of a wide-band mono-pulse slotted waveguide antenna array
in this paper, a resonant slotted waveguide array antenna with circular boundary has been designed and simulated for mono-pulse airborne radar applications. the antenna parameters are:11% bandwidth in x-band (8.6-9.6ghz),vswr < 2, 38dbi directivity, sidelobes level of - 20db and 3-db beam-widths of 2.1degree. to design this antenna, it is divided into short sections (sub-arrays) each with a uni...
متن کاملEtched ring absorbing waveguide filter based on a slotted waveguide antenna response
A cascade of resistively loaded etched rings in waveguide is proposed to act as the load in a balanced FMCW Reflected Power Canceller topology using a slotted waveguide array antenna. A synthesis technique using derived equivalent circuit models, is presented and tested.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Antennas and Propagation
سال: 2017
ISSN: 1687-5869,1687-5877
DOI: 10.1155/2017/7385357