Design of an Equivalent Antenna Model for Array Antennas Using Open-Ended Waveguide
نویسندگان
چکیده
منابع مشابه
an infinite planar array of rectangular microstrip patch antenna analysis
the methods which are used to analyze microstrip antennas, are divited into three categories: empirical methods, semi-empirical methods and full-wave analysis. empirical and semi-empirical methods are generally based on some fundamental simplifying assumptions about quality of surface current distribution and substrate thickness. thses simplificatioms cause low accuracy in field evaluation. ful...
15 صفحه اولDual-antenna system composed of patch array and open-ended waveguide for eliminating blindness of wireless communications
1. Abstract: In mobile communications in urban area, it is a significant problem that blind spots of in the narrow street are caused by high buildings. In our previous works, a reflectarray antenna was developed to solve the problem [1]. However, the gain of reflectarray becomes very low when a very broad scattering angle is required. In this research, a new dual-antenna system is proposed, inc...
متن کاملAn Ultralow Cross-Polarization Slot Array Antenna in Narrow Wall of Angled Ridge Waveguide
A low cross-polarization slot array antenna in the narrow wall of ridge waveguide is presented. A non-angled slot which is created in the narrow wall of the ridge waveguide is considered to be used as radiating resonant slot. The normalized resistance and normalized reactance curves are presented for design purposes. A six element slot array waveguide antenna with ridges on its narrow wall is t...
متن کاملinvestigating the feasibility of a proposed model for geometric design of deployable arch structures
deployable scissor type structures are composed of the so-called scissor-like elements (sles), which are connected to each other at an intermediate point through a pivotal connection and allow them to be folded into a compact bundle for storage or transport. several sles are connected to each other in order to form units with regular polygonal plan views. the sides and radii of the polygons are...
An Inversion Procedure for Sizing Surface Cracks in Metals, Using an Open-ended Waveguide Probe
Fatigue and stress crack detection in metallic structures is of utmost importance to the in-service inspections of metallic components. Beside the crack detection, the prediction of the crack size leads to a better estimation of the useful life of the metal in service. Currently, there are several prominent nondestructive testing (NDT) techniques for detecting and sizing surface cracks in metal...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of Korean Institute of Electromagnetic Engineering and Science
سال: 2015
ISSN: 1226-3133
DOI: 10.5515/kjkiees.2015.26.6.525