Design of balanced‐to‐balanced filtering power divider with arbitrary power division ratio based on circular patch resonator
نویسندگان
چکیده
منابع مشابه
Compact Wideband Gysel Power Divider with Arbitrary Power Division Based on Patch Type Structure
A novel Gysel power divider based on patch type structure is presented in this paper. The proposed power divider possesses broad bandwidth, small physical occupation and arbitrary power division. More than 30% bandwidth enhancement is achieved based on the −15 dB input return loss criteria, while 55% size reduction is realized compared with conventional Gysel power divider. What’s more, flat di...
متن کاملPower Divider with Arbitrary Power Ratio and Arbitrary Ripple Level Using Filter Synthesis Techniques
A novel type of power divider, featuring arbitrary power ratio and arbitrary ripple level, is proposed. This divider consists of a two-port filtering structure connected to a circulator and is straightforwardly designed using microwave filter synthesis techniques. An example is provided, with low-pass domain synthesis and experimental divider demonstration at the Xband, after low-pass to bandpa...
متن کاملapplication of upfc based on svpwm for power quality improvement
در سالهای اخیر،اختلالات کیفیت توان مهمترین موضوع می باشد که محققان زیادی را برای پیدا کردن راه حلی برای حل آن علاقه مند ساخته است.امروزه کیفیت توان در سیستم قدرت برای مراکز صنعتی،تجاری وکاربردهای بیمارستانی مسئله مهمی می باشد.مشکل ولتاژمثل شرایط افت ولتاژواضافه جریان ناشی از اتصال کوتاه مدار یا وقوع خطا در سیستم بیشتر مورد توجه می باشد. برای مطالعه افت ولتاژ واضافه جریان،محققان زیادی کار کرده ...
15 صفحه اولFiltering Power Divider/Combiner Based on Half Mode Substrate Integrated Waveguide (HMSIW) Technology for High Power Applications
A filtering power divider/power combiner based on half mode substrate integrated waveguide technology for high power applications is proposed. This design includes one half mode substrate integrated waveguide cavity, one matched load, and four sections of quarter-wavelength transmission lines. The high isolation between output ports is obtained by combining the half mode substrate integrated wa...
متن کاملSeven Ports Power Divider with Various Power Division Ratios
A seven ports network is proposed to act as a six-way power divider/combiner. The proposed network structure consists of a set of λ/4 planar transmission lines at the design frequency and does not require any isolating resistor. The power divider is capable of providing various power ratios by judicious choice of the transmission lines characteristic impedances. Design equations are derived for...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IET Microwaves, Antennas & Propagation
سال: 2020
ISSN: 1751-8733,1751-8733
DOI: 10.1049/iet-map.2019.0554