Design of current sources for load common mode optimization

Nanoporous anodized aluminum thickness optimization through pulse current mode

The purpose of this study was to optimize the thickness of anodizing Aluminum coatings processed under pulse current mode through the Design of Experiments (DOE) method. Thickness measurement, polarization and electrochemical impedance spectroscopy were employed to take Thickness and corrosion behaviors of the anodized coatings into consideration. Also, Field-emission scanning electron microsco...

Common Mode Feedback Analysis for EIT Systems with Distributed Current Sources

The use of differential voltage measurements is widely used in EIT instruments. Instrumentation amplifiers are always affected by common mode voltages at their input. These voltages may have different origins, being the current sources and multiplexers the ones which contribute the most. However, even considering ideal current sources and multiplexers, some amount of common mode voltage will al...

Optimization of Shunt Capacitor Filters for Reduction of Common Mode Current in Motor Drives

Nonlinear Sliding Mode Control Design for Shunt Active Power Filter with the Minimization of Load Current

This paper proposes a new method of sliding mode base controller for shunt active power filter to compensate the harmonic currents of a load. In this controller there isn't any need to PI DC voltage controller to regulate the DC capacitor voltage of shunt active power filter. In this method, first the reference currents of shunt active power filter that should be tracked to reduce or eliminate ...

investigating the feasibility of a proposed model for geometric design of deployable arch structures

deployable scissor type structures are composed of the so-called scissor-like elements (sles), which are connected to each other at an intermediate point through a pivotal connection and allow them to be folded into a compact bundle for storage or transport. several sles are connected to each other in order to form units with regular polygonal plan views. the sides and radii of the polygons are...