Design of four-point SENB specimens with stable crack growth
نویسندگان
چکیده
منابع مشابه
Crack Linkup by Stable Crack Growth
Experimentally determined T ε and CTOA resistance curves were used to simulate numerically, stable crack growth and the ensuing crack linkup in 0.8 mm thick 2024-T3 aluminum tension specimen with multiple site damage (MSD) subjected to monotonically/cyclically increasing loading. The T ε integral correctly predicted the crack growth and linkup history as well as the onset of rapid fracture in M...
متن کاملStable and Unstable Crack Growth in Viscoelastic Media
The problem of failure of load-bearing structures by fracture is generally important in all phases of our society. It may concern small household items as well as expensive structures of civil or space applications and accordingly may cause varying degrees of economic distress. While the state of failure is usually easily determined as either “not failed” or “completely failed,” the estimation ...
متن کاملNumerical Investigation on Stable Crack Growth in Plane Stress
Large deformation finite element analysis has been carried out to investigate the stress-strain fields ahead of a growing crack for compact tension (a/W=0.5) and three-point bend (a/W=0.1 and 0.5) specimens under plane stress condition. The crack growth is controlled by the experimental J-integral resistance curves measured by Sun et al. The results indicate that the distributions of opening st...
متن کاملShort Crack Initiation and Growth at 600oC in Notched Specimens of Inconel718
The natural initiation and growth of short cracks in Inconel 718 U-notch specimens has been studied at 600C in air. U notches were introduced through broaching, and hardness traces and optical microscopy on cross sections through the U notch broaching showed that the broaching process had introduced a deformed, work hardened layer. Fatigue tests were conducted under load control using a 1-1-1-1...
متن کاملطراحی و ساخت دستگاه four-point probe station
یکی از ویژگی های اساسی مواد هادی مقاومت الکتریکی آن هاست که با داشتن تعداد الکترونهای آزاد لایه ظرفیت می توان مقاومت الکتریکی آن ماده را پیدا نمود. با اندازه گیری مقاومت الکتریکی مواد می توان ویژگیها و مشخصات ماده را تعیین نمود. در این پایان نامه بنا داریم به اندازه گیری مقاومت الکتریکی با استفاده چهار پراب همراستا با فاصله ثابت از هم که در تماس با سطح یک ویفر سیلیکونی هستند اقدام کنیم. در عم...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Engineering Fracture Mechanics
سال: 2018
ISSN: 0013-7944
DOI: 10.1016/j.engfracmech.2018.01.018