Design of high PAE class-E power amplifier for wireless power transmission
نویسندگان
چکیده
منابع مشابه
High Efficiency Class-F Power Amplifier Design
Due to the high increase in and demand for a wide assortment of applications that require low-cost, high-efficiency, and compact systems, RF power amplifiers are considered the most critical design blocks and power consuming components in wireless communication, TV transmission, radar, and RF heating. Therefore, much research has been carried out in order to improve the performance of power amp...
متن کاملA Class E Power Amplifier with Low Voltage Stress
A new output structure for class E power amplifier (PA) is proposed in this paper. A series LC resonator circuit, tuned near the second harmonic of the operating frequency is added to the output circuit. This resonator causes low impedance at the second harmonic. The output circuit is designed to shape the switch voltage of the class E amplifier and lower the voltage stress of the transistor. T...
متن کامل3.5-3.8GHz class-E balanced GaN HEMT power amplifier with 20W Pout and 80% PAE
In this study, balanced and single ended class-E power amplifiers (PAs) were designed and realized for 3.5–3.8GHz band by using Gallium Nitride high electron mobility transistor (GaN HEMT). Realizations were made on low loss Rogers RT5880 dielectric material which has 0.254mm thickness and 2.2 dielectric constant. Proposed balanced class-E PA has approximately 20W (43 dBm) output power with 80%...
متن کاملA 2.45 GHz 30dBm differential 0.18 μm CMOS class-E power amplifier with 42% PAE
This paper presents a 30dBm (1W) class-E power amplifier projected in a standard 0.18-μm CMOS technology. The power amplifier (PA) consists in two differentials stages. The main stage employs a cascode class-E RF power amplifier with a self-biasing circuit. The driver stage uses the technique of Injection-Locking to substantially reduce the input power signal, maintaining a high gain. At 2.45 G...
متن کاملA Class E Power Amplifier with Coupling Coils for a Wireless Power Transfer System
A class E power amplifier including coupling coils is proposed for application in a wireless power transfer system using magnetic coupling. The proposed amplifier is directly connected to the coils with no discrete components for harmonic filtering and dc feeding, which could cause efficiency degradation of the amplifier. The system with the differential amplifier shows 6.95 W of transmitted po...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEICE Electronics Express
سال: 2014
ISSN: 1349-2543
DOI: 10.1587/elex.11.20140682