Design of Hybrid Wheeled and Legged Mobile Robot with a Waist Joint
نویسندگان
چکیده
منابع مشابه
Hybrid Control Design for a Wheeled Mobile Robot
We present a hybrid systems solution to the problem of trajectory tracking for a four-wheel steered four-wheel driven mobile robot. The robot is modelled as a non-holonomic dynamic system subject to pure rolling, no-slip constraints. Under normal driving conditions, a nonlinear trajectory tracking feedback control law based on dynamic feedback linearization is sufficient to stabilize the system...
متن کاملDesign and Optimization of a Hybrid-Driven Waist Rehabilitation Robot
In this paper a waist rehabilitation robot driven by cables and pneumatic artificial muscles (PAMs) has been conceptualized and designed. In the process of mechanism design, the human body structure, the waist movement characteristics, and the actuators' driving characteristics are the main considerable factors to make the hybrid-driven waist rehabilitation robot (HWRR) cost-effective, safe, fl...
متن کاملDesign of a Highly Maneuverable Wheeled Mobile Robot
An omnidirectional mobile robot is able, kinematically, to move in any direction regardless of current pose. To date, nearly all designs and analyses of omnidirectional mobile robots have considered the case of motion on flat, smooth terrain. In this paper, an investigation of the design and analysis of an omnidirectional mobile robot for use in rough terrain is presented. Kinematic and geometr...
متن کاملMechatronics Design of a Mecanum Wheeled Mobile Robot
The Mecanum wheel was designed in Sweden in 1975. Using four of these wheels provides omni-directional movement for a vehicle without needing a conventional steering system (Muir & Neumann, 1990; Dickerson & Lapin, 1991; Braunl, 1999; Navy, USA, 2002 and Lunze & Schmid, 2002). The wheel itself consists of a hub carrying a number of free moving rollers angled at 45° about the hub's circumference...
متن کاملDesign and control of Two-Wheeled Inverted Pendulum Mobile Robot
This paper addresses design and path following control problem of a nonholonomic Two-Wheeled Inverted Pendulum Mobile Robot. We propose control architecture based on two control layers. A speed inner loop control scheme is first designed based on state feedback technique to ensure stability of the inverted structure of the robot. A second outer loop control scheme is proposed to help the robot ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Korean Institute of Intelligent Systems
سال: 2014
ISSN: 1976-9172
DOI: 10.5391/jkiis.2014.24.3.304