Design of Single-Stage Flyback PFC Converter for LED Driver

Design Guideline of Single-Stage Flyback AC-DC Converter Using FAN7530 for LED Lighting

Design Guideline of Single-Stage Flyback AC-DC Converter Using FAN7530 for LED Lighting

This application note describes the single-stage power factor correction (PFC) and presents the design guidelines of a 75W universal-input, single-stage PFC for LED lighting applications. Flyback converter topology controlled by the critical conduction mode control IC, FAN7530 is applied and several functions; such as CV/CC mode feedback circuits, cycle-by-cycle current limit, soft-starting fun...

A Highly Efficient SEPIC-Flyback Integrated Converter as an LED Driver

Light-emitting diodes (LEDs) have been widely used for various lighting applications. A high power factor single-stage single-switch driver can be used to supply LEDs without using an electrolytic capacitor. By integrating the single-ended primary inductor converter (SEPIC) and flyback converter, LED driver could achieve nearly a unity power factor and low total harmonic distortion (THD). Since...

A Single-Stage LED Driver Based on Interleaved Buck-boost Circuit and LLC Resonant Converter

A single-stage LED driver based on interleaved buck-boost circuit and LLC resonant converter is proposed. The buck-boost circuit and LLC resonant converter are integrated by sharing switches, which can decrease the system cost and improve system efficiency. The input voltage of the buck-boost circuit is half of the rectified voltage, and two buckboost circuits are formed with the two half-bridg...

Passive Pfc for Flyback Convertors

A new passive Power Factor Corrector (PFC) based on Valley Fill (VF) is proposed for an off-line Flyback converter. By adding an extra winding which is magnetically coupled to the Flyback transformer and electrically coupled to the VF, higher Power Factor (PF) and lower Total Harmonic Distortion (THD) can be achieved. The proposed circuit uses a high frequency inductor, low voltage capacitors t...