Design of Temperature Compensation System for MEMS Gyroscopes Based on STM32
نویسندگان
چکیده
منابع مشابه
Mems-fabricated Gyroscopes with Feedback Compensation
This paper presents a lead-lag compensator design for a MEMS-fabricated microgyroscope. The microgyroscope is basically a high Q system, thus the bandwidth is limited to be narrow. To overcome the open-loop performance limitations, a feedback controller is designed to improve the resolution, bandwidth, linearity, and bias stability of the microgyroscope. The feedback controller is applied to th...
متن کاملA Novel Control System Design for Vibrational MEMS Gyroscopes
There are two major control problems associated with vibrational MEMS gyroscopes: to control two vibrating axes (or modes) of the gyroscope, and to estimate a time-varying rotation rate. This paper demonstrates how a novel active disturbance rejection control addresses these problems in the presence of the mismatch of natural frequencies between two axes, mechanical-thermal noises, Quadrature e...
متن کاملDesign of the Data Acquisition System Based on STM32
With rapid development of modern society, the requirements for high precise temperature and humidity is growing rapidly, for example production, storage, transportation, environment etc., these all have strict requirements for temperature and humidity testing, so the real-time monitoring of temperature and humidity and alarm prompt is extremely important. In this paper, a temperature and humidi...
متن کاملMEMS Gyroscopes Based on Acoustic Sagnac Effect †
This paper reports on the design, fabrication and preliminary test results of a novel microelectromechanical systems (MEMS) device—the acoustic gyroscope. The unique operating mechanism is based on the “acoustic version” of the Sagnac effect in fiber-optic gyros. The device measures the phase difference between two sound waves traveling in opposite directions, and correlates the signal to the a...
متن کاملClosed-Loop Compensation of the Quadrature Error in MEMS Vibratory Gyroscopes
In this paper, a simple but effective method for compensation of the quadrature error in MEMS vibratory gyroscope is provided. The proposed method does not require any change in the sensor structure, or additional circuit in the feedback path. The mathematical relations of the proposed feedback readout system were analyzed and the proposed solution assures good rejection capabilities. Based on ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2018
ISSN: 1757-899X
DOI: 10.1088/1757-899x/381/1/012139