Design of The Thick Wind Turbine Airfoil Based on An Improved MOPSO Algorithm
نویسندگان
چکیده
منابع مشابه
An Improved MPPT Method of Wind Turbine Based on HCS Method by Using Fuzzy Logic System
In this paper presents a Maximum Power Point Tracking (MPPT) technique based on the Hill Climbing Search (HCS) method and fuzzy logic system for Wind Turbines (WTs) including of Permanent Magnet Synchronous Generator (PMSG) as generator. In the conventional HCS method the step size is constant, therefor both steady-state response and dynamic response of method cannot provide at the same time an...
متن کاملThick airfoil designs for the root of the 10MW INNWIND.EU wind turbine
The main objective of the “INNWIND.EU” project is to investigate and demonstrate innovative designs for 10-20MW offshore wind turbines and their key components, such as lightweight rotors. In this context, the present paper describes the development of two new airfoils for the blade root region. From the structural point of view, the root is the region in charge of transmitting all the loads of...
متن کاملBionic Design of Wind Turbine Blade Based on Long-Eared Owl's Airfoil
The main purpose of this paper is to demonstrate a bionic design for the airfoil of wind turbines inspired by the morphology of Long-eared Owl's wings. Glauert Model was adopted to design the standard blade and the bionic blade, respectively. Numerical analysis method was utilized to study the aerodynamic characteristics of the airfoils as well as the blades. Results show that the bionic airfoi...
متن کاملAerodynamic Optimal Design of Wind Turbine Blades using Genetic Algorithm
Wind power has been widely considered and utilized in recent years as one of the most promising renewable energy sources. In the current research study, aerodynamic analysis of the upwind three-bladed horizontal axis turbine is carried out using blade element momentum theory (BEM), and a genetic algorithm (GA) is applied as an optimization method. Output power generation is considered as an obj...
متن کاملNumerical Investigation of S822 Wind Turbine Airfoil
We carried out direct numerical simulations of the flow past a two-dimensional S822 wind turbine blade section at a chord Reynolds number of Re=100,000 and an angle of attack of α = 5deg. Without blade rotation the separated boundary layer “rolls up” into spanwise vortices which then “break up” into smaller scale structures leading to transition to turbulence. Simulation results compare favorab...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Earth and Environmental Science
سال: 2020
ISSN: 1755-1315
DOI: 10.1088/1755-1315/619/1/012056